DIGITUS Industrial Network Cabinet, Indoor, IP55

Product number: DN-19 42U-I-8/8-1
EAN: 4016032371496

42U network rack indoor IP55 2100x800x800, incl. plinth, grey (RAL 7035)

  • Safety class IP55 against dust & water ingress acc. to IEC EN60529
  • IK10 mechanical impact resistance acc. to IEC EN62262
  • 4 point locking system on front- & rear door
  • incl. already mounted plinth

More product information

Description

The free-standing industrial network cabinets are specially adapted according to protection type IP55 for the requirements of harsh environments. The floor structure can be opened in a modular design thanks to its galvanized, bolted panels. In addition, it is equipped with a sliding cable inlet with foam rubber seal as well as PG cable glands. A plinth mounted under the cabinet (100 mm) provides extra storage room for excess cable lengths. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. A wraparound profile perforation supports a wide range of installation options in the cabinet. Coloring is done with electrostatic powder coating in the standard color gray (RAL 7035). The adhesion capacity according to EN ISO 2409: Class 0 to 1 as well as the 500-hour test carried out for resistance against salt spray, demonstrates a permissible operating temperature from - 25 °C up to + 70 °C. The removable side walls, fastened with countersunk screws, as well as doors including swing handle with profile half-cylinder, improve the security of access.

Technical details

  • Front door with complete metal frame and 4 mm strong tempered glass
  • Closed steel rear door with filtered air inlet (250x250 mm)
  • Door structure is produced with multiple bending to obtain rigidity and strength
  • Special gasketing system between metal frame and profile system made out of PUR (Polyurethane)
  • Side panels with special fixing via countersunk bolt
  • 130° door opening angle
  • 1.5 - 2.0 mm strong steel sheet
  • Corner parts made out of E-160 material with aluminum injection molding, high resistance against corrosion
  • Profile hole structure rotary inside
  • 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
  • 483 mm (19“) profile rails are adjustable in depth and with height unit marking
  • Base chassis is equipped with sliding cable entry mechanism & PG cable entries (1x PG 48, 4x PG 21)
  • Profiles produced with DIN EN10142-2000 DX51 D+Z material provide high resistance against corrosion
  • Roof with screwed visual cover panel for lifting eye bolts
  • Equipment mounting depth min.-max.: 160-660 mm
  • Cabinet type: Industrial cabinet
  • Color: light grey, RAL 7035
  • Depth: 800 mm
  • Front door: Glass door, single opening
  • Load capacity: 1500 kg
  • Units: 42
  • Width: 800 mm
  • IP protection class: IP55
  • Mounted: yes

Package content

  • Earthing wire set
  • Installation set (screws, cage nuts, washers)
  • 2x Keys

Downloads and Certificates

Logistics

  Number
(pcs)
Weight
(kg)
Depth
(cm)
Width
(cm)
Height
(cm)
cm³
Packaging Unit Carton 1 166,00 81,50 81,50 230,00 1.527.717,50
Packaging Unit Inside 1 166,00 81,50 81,50 230,00 1.527.717,50
Packaging Unit Single 1 166,00 81,50 81,50 230,00 1.527.717,50
Customs tariff number: 9403208000

Accessories

Blanking Panels
4U blank panel color grey (RAL 7035)
Product number
DN-19 BPN-04
1U blank panel color grey (RAL 7035)
Product number
DN-19 BPN-01
3U blank panel color grey (RAL 7035)
Product number
DN-19 BPN-03
2U blank panel color grey (RAL 7035)
Product number
DN-19 BPN-02
Spare Parts and Doors
Levelling feet for network- and server cabinets adjustable height, 4 pieces
Product number
DN-19 FEET
Key for IP55 wall mounting and free standing cabinets, key number 333
Product number
DN-19 KEY-EK333
Further Accessories
M6 installation screw set, 50 pieces 50x black screws, cage nuts and washers
Product number
DN-19 SET
Slide rails, L shape, for 600-800 mm depth racks adjustable 350-600 mm depth, set with 2 pieces
Product number
DN-19 GS-NW
Potential equalisation bar, 220 mm 6 connection points, incl. earthing leads
Product number
DN-19 EARTH
Castors for open racks and IP55 network racks set with 4 pieces, 2 pieces with brake system
Product number
DN-19 CASTOR-OR
M6 installation screw set, 50 pieces 50x silver screws, cage nuts and washers
Product number
DN-19 SET-S
LED lighting, magnetic two sensor modi, incl. power adapter
Product number
DN-19 LIGHT-3
Drawers
2U lockable drawer with handle 88x481x400 mm, color grey (RAL 7035)
Product number
DN-19 KEY-2U
3U lockable drawer with handle 132x481x400 mm, color grey (RAL 7035)
Product number
DN-19 KEY-3U
1U lockable drawer with handle 44x481x400 mm, color grey (RAL 7035)
Product number
DN-19 KEY-1U
Cable Management
1U cable management ring, 44x60 mm 10 pieces, color grey (RAL 7035)
Product number
DN-19 ORG-1
2U cable management ring, 44x100 mm 10 pieces, color grey (RAL 7035)
Product number
DN-19 ORG-2
1U cable management panel 5x cable rings 40x60 mm, color grey (RAL 7035)
Product number
DN-97601
Hook and loop tape, 20 mm wide for structured cabling, 10 m roll, color black
Product number
DN-CT-10M-20
1U cable management panel with 30x400 mm brush 480x120 mm cable fixing tray, grey (RAL 7035)
Product number
DN-19 ORG-3U
1U cable brush management panel, 44x483x11 mm brush size 27x423 mm, color grey (RAL 7035)
Product number
DN-97660
2U cable management panel 5x cable rings 85x60 mm, color grey (RAL 7035)
Product number
DN-19 ORG-2U
1U cable management cage detachable rear plate, 44x483x68 mm, grey
Product number
DN-97616
1U cable management panel, 5x PVC cable rings 31x85 mm, rotatable, replaceable, grey (RAL 7035)
Product number
DN-97601-2
1U cable management panel with brush entries 4x aluminum cable rings 44x60 mm, grey (RAL 7035)
Product number
DN-97662
3U cable management ring, 45x150 mm 10 pieces, color grey (RAL 7035)
Product number
DN-19 ORG-3-1
Basic
1U Aluminum PDU, rackmountable, 7x safety outlet 16A Plug, 250VAC 50/60Hz, switch, surge Protection
Product number
DN-95407
1U Aluminum PDU, rackmountable, 8x CEE 7/7 outlet 10A Plug, 250VAC 50/60Hz, IEC C14 plug, pre-fuse
Product number
DN-95410
1U Aluminum PDU, rackmountable, 8x red CEE 7/7 10A Plug, 250VAC 50/60Hz, outlet
Product number
DN-95410-R
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, switch
Product number
DN-95402
1U Aluminum PDU, rackmountable, 8x safety outlet 16A, 4000W, 250VAC 50/60Hz,
Product number
DN-95401
Aluminium PDU, Rackmountable, frequency filter 16A, 4000W, 250VAC 50/60Hz, 7x safety, 2m
Product number
DN-95412
1U Aluminum PDU, rackmountable 10A, 2500W, 250VAC 50/60Hz, overl-prot.,1xC14
Product number
DN-95404
Aluminum PDU, rackmountable, 12x safety outlet 2x 16A, 250VAC 50/60Hz, overload protection
Product number
DN-95405
18 way outlet strip - 42U in length vertical dual circuit, aluminum, 2x 16 A, circuit breaker
Product number
A-19-STRIP42-1
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, overload protection
Product number
DN-95403
Shelves
2U fixed shelf for racks from 450 mm depth 88,5x483x352 mm, up to 25 kg, grey (RAL 7035)
Product number
DN-97610
1U fixed shelf for 800 mm depth racks 43x484x508 mm, adjust. up to 700 mm depth, grey
Product number
DN-97646
1U extendible shelf for 800 mm depth racks 40x484x568 mm, up to 25 kg, grey (RAL 7035)
Product number
DN-19 TRAY-2-800
1U fixed shelf for racks from 400 mm depth 45x482x250 mm, up to 15 kg, grey (RAL 7035)
Product number
DN-97609
1U fixed shelf for racks from 600 mm depth 44x482x400 mm, up to 15 kg, grey (RAL 7035)
Product number
DN-97614
1U extendible shelf for 600 mm depth racks 40x485x368 mm, up to 25 kg, grey (RAL 7035)
Product number
DN-19 TRAY-2-600
1U fixed shelf for 600 mm depth racks 44x483x358 mm, adjust. 350-550 mm depth, grey
Product number
DN-97644
2U fixed shelf for racks from 800 mm depth 88,5x482x552 mm, up to 25 kg, grey (RAL 7035)
Product number
DN-19 TRAY-2-55
2U extendib. shelf for cabinets from 450 mm depth 88x483x352 mm, up to 30 kg, grey (RAL 7035)
Product number
DN-19-TRAY-2-450