Solar cable extension 3 m, 4 mm², MC4 connection, PV cable 1500 V DC, UV-resistant & weatherproof

DIGITUS Solar cable extension 3 m, 4 mm², MC4 connection, PV cable 1500 V DC, UV-resistant & weatherproof

Produktové číslo: DK-SCEC64-0030
EAN: 4016032501831

Solar Extension cable, 4 sqmm, MC4 connector 3m,4sqmm,halogen-free,UV-res.,flex,IP67,2pcs

Safe, efficient and ready to use - this solar cable extension with MC4 connections is the perfect plug-and-play solution for all indoor and outdoor photovoltaic projects.

  • High conductivity and corrosion protection - tinned copper conductors with 4 mm² conductor cross-section
  • Fast, safe, tool-free - thanks to pre-assembled MC4 connectors, it can be connected in a few simple steps
  • Suitable for high voltage - Thanks to a voltage tolerance of up to 1000 V DC, the solar cable is ideal for modern high-voltage PV systems
  • High temperature resistance - Suitable for temperature ranges from -40 °C to +85 °C
  • Safety in case of fire - The cable sheath is flame-retardant in accordance with UL94 V-0 and thus contributes to fire protection
  • Approved for international use - Complies with CE and EN 50618 standards, EN 60332-1-2 (Eca) , EN 62852:2015 certified
  • Flexible cable design - easy to lay, even with tight radii
  • Weatherproof & durable - Suitable for permanent outdoor use
  • High efficiency - Low contact resistance (≤ 0.5 Ω) ensures minimal power losses

Distribution Partner Overview

More product information

Popis

This high-quality solar cable for extension with pre-assembled MC4 connectors at both ends has been specially developed for use in photovoltaic systems. With a conductor cross-section of 4 mm², a length of 3 m and a dielectric strength of up to 1500 V DC, it is ideal for connecting solar modules, inverters or other PV components. The cable consists of a tinned copper conductor, which ensures optimum current transmission and reliable corrosion protection. The resistant XLPO insulation and robust PA66 jacket offer excellent protection against UV radiation, moisture, ozone and mechanical stress. Thanks to the pre-assembled MC4 connections, the cable is ready for immediate use and can be installed effortlessly - ideal for DIY solar projects or professional PV installations. With an operating temperature range of -40°C to +85°C, flame-retardant properties (UL94 V-0) and a contact resistance of 0.509Ω, this cable guarantees maximum safety, efficiency and durability - even in demanding weather conditions.

Technical details

  • Length: 3m
  • Conductor cross-section: 4mm²
  • Voltage tolerance: up to 1500V DC / 1000V AC
  • Rated current: 30 A
  • Conductor material: Tinned copper wire
  • Conductor structure:TS 56/0.285±0.01
  • Conductor diameter: 2.4mm
  • Insulation material: XLPO
  • Jacket material: XLPO
  • Plug material: PPE, PA 66, halogen-free
  • Insulation diameter: 3.8mm ±0.1mm
  • Outer diameter: 5.5mm ±0.2mm
  • Temperature range: -40 °C to +85 °C
  • Contact resistance: ≤0.509Ω
  • Insulation resistance: ≥ 580MΩ-km
  • Dielectric strength: AC 6.5 kV / DC 15 kV (5 minutes)
  • Spark test: 7 kV
  • Standards & certificates: CEEN 50618, EN 60332-1-2 (Eca) , EN 62852: 2015, UL94 V-0
  • Coat color: black, red
  • Connection 1: MC4 plug
  • Connection 2: MC4 socket

Package content

  • Pair of 2 solar cables

Downloads and Certificates

Katalogový list

Logistika

  Počet
(pcs) 		Hmotnost
(kg) 		Hloubka
(cm) 		Šířka
(cm) 		Výška
(cm) 		cm³
Jednotka balení – krabice 40 16,30 50,00 28,00 28,00 39.200,00
Jednotka balení - uvnitř 1 0,41 0,00 0,00 0,00 0
Jednotka balení - jednoduchá 1 0,41 28,50 18,50 4,50 2.372,63
Číslo celního sazebníku: 8544499500

Safety notes

  • Only operate the device indoors. Avoid exposure to moisture, dust, sunlight or other sources of heat.
  • The socket outlet is part of the building installation. The relevant national standards and directives must be observed during planning and installation.
  • The appliance may only be operated on the 230V/50 Hz AC mains supply. Work on the 230V mains may only be carried out by a qualified electrician certified in your country.
  • Observe the applicable accident prevention regulations during installation.
  • To avoid electric shock to the appliance, please disconnect the mains voltage (e.g. switch off the circuit breaker).
  • Failure to observe the installation instructions may result in fire or other hazards.
  • Installation may only be carried out in commercially available flush-mounted boxes (appliance boxes) in accordance with DIN 49073-1, with a minimum depth of 40 mm.
  • When connecting to the device terminals, observe the permissible cables and cable cross-sections.
  • Mandatory information in accordance with the appliance safety standard
  • Note !
  • Installation only by persons with relevant electrical knowledge and experience!
  • Improper installation puts your own life and the lives of the users of the electrical system at risk.
  • You risk serious damage to property if the installation is not carried out correctly. You may be personally liable for personal injury and damage to property.
  • Contact an electrician.
  • Specialist knowledge required for installation:
  • The following specialist knowledge in particular is required for installation:
  • The application of the 5 safety rules 1. Disconnect 2.Secure against reconnection 3.Ensure there is no voltage 4.Earth and short-circuit 5.Cover or isolate neighboring live parts.
  • Selection of suitable tools, measuring equipment and, if necessary, personal protective equipment.
  • Selection of the electrical installation material to ensure the switch-off conditions.
  • Check the electrical system after installation.
  • Observing the IP protection classes
  • Installation only with suitable electrical installation material
  • Check and observe the respective specifications of the type of supply network (TN system, TT system or IT system) and the resulting connection conditions (zeroing, protective earthing, or any additional measures required, etc.).
  • Maintenance and cleaning:
  • The socket is maintenance-free.
  • Leave repairs to a qualified electrician.
  • Only clean the device with a soft, clean, dry and lint-free cloth.
  • Do not use cleaning agents containing solvents. This can damage the plastic housing.
  • Do not use wet cloths or sponges to clean the appliance.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com