Ednet A4 Teplý laminátor 400 mm/min Bílá

Downloads and Certificates

Logistika

Safety notes

• Read the operating instructions carefully and completely before using the appliance for the first time.
• Always place the appliance on a level and dry surface. It must be freely accessible from all sides. It is not advisable to use an extension cable!
• Do not open the laminator or repair it yourself. Take it to your specialist dealer if it has been damaged or contact our service hotline.
• Only use film pockets of the correct size (max. up to A4) and thickness (80 to 100 micrometers). Foil pockets that are too thin can lead to a blockage inside the device.
• Do not touch any hot surfaces of the appliance after it has been put into operation.
• For safety reasons, the laminator must not be used by children unless they are supervised by an adult.
• Do not operate the appliance outdoors or near water.
• Do not use the device to hot laminate materials that are sensitive to heat, such as thermal fax paper. These materials are only suitable for cold lamination.
• Do not spill or pour any liquid on the appliance and do not allow it to enter the appliance.
• Do not insert any metal objects into the appliance. Do not reach into the appliance with your fingers.
• The laminator is not suitable for continuous commercial use. It is advisable to set the appliance switch to the "O" position for 30 minutes after it has been in operation for approx. 30 minutes.
• The socket outlet must be located near the appliance and must always be easily accessible.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com