FTTH pre-assembled drop cable, blow-in, singlemode, 1 fiber, LC/APC, 30 m

DIGITUS FTTH pre-assembled drop cable, blow-in, singlemode, 1 fiber, LC/APC, 30 m

Produktové číslo: DK-3901LCA-30
EAN: 4016032501251

FTTH Preterminated cable, Singlemode, 1 Core Blowable, LC-APC to LC-APC, 30 m

The pre-assembled, blow-in cable is a lightweight, factory pre-assembled fiber optic cable. It is characterized by high flexibility, low friction and prefabricated connectors, enabling fast and reliable installation without splicing work on site. Ideally

  • Pre-assembled with high-performance connectors - no splicing or on-site assembly required
  • Bend-insensitive fiber ensures reliable performance even in tight installation areas with minimal signal loss
  • Compact design enables air-assisted blow-in installation in microducts
  • Ideal for FTTH network expansion and last-mile connections

Distribution Partner Overview

More product information

Popis

The blow-in cable is a specialized fiber optic cable designed for efficient and fast installation using air pressure blow-in technology in microducts. This cable comes with factory pre-terminated polished connectors, eliminating the need for on-site splicing and significantly reducing installation time and potential points of failure. It enables fast and uninterrupted installation of fiber optic connections to homes and businesses. It ensures high-quality, fast and low-latency connections within complex network infrastructures and offers a future-proof solution for modern fiber optic networks by optimally combining efficiency, reliability and scalability. By using pre-terminated, blow-in technology, installers and network operators can significantly reduce installation times while ensuring long-term stable performance in demanding broadband applications.

Technical details

  • Product type: Pre-assembled, blow-in FTTH drop cable
  • Fiber type: Singlemode ITU-T G.657.A2 (insensitive to bending)
  • Number of fibers: 1 fiber
  • Outer diameter: 2.8 mm
  • Cable length: 30 meters
  • Strain relief / reinforcing elements: Aramid yarn (Kevlar)
  • Sheath material: PE
  • Color: White
  • Connector type: LC/APC
  • Insertion loss: ≤ 0.3 dB
  • Return loss: ≥ 60 dB (APC)
  • Minimum bending radius (operation): ≥ 10 mm
  • Blow-in capability: Suitable for microducts (3.5 mm internal diameter)
  • Operating temperature: -20 °C to +60 °C
  • Storage temperature: -40 °C to +70 °C

Package content

  • 1 x FTTH pre-assembled drop cable, blow-in, singlemode, 1 fiber, LC/APC, 30 m

Downloads and Certificates

Katalogový list

Logistika

  Počet
(pcs) 		Hmotnost
(kg) 		Hloubka
(cm) 		Šířka
(cm) 		Výška
(cm) 		cm³
Jednotka balení – krabice 40 9,30 45,00 45,00 25,00 50.625,00
Jednotka balení - uvnitř 10 2,33 21,50 21,50 22,00 10.169,50
Jednotka balení - jednoduchá 1 0,23 34,00 23,00 2,00 1.564,00
Číslo celního sazebníku: 8544700000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
  • eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com