FLUKE MicroScanner 2 wiring verification tester

Product number: ACT-MS2-100
EAN: 0754082054368

MicroScanner2 Cable Verirfier includes MicroScanner2, Main Wiremap Adapter

MicroScanner2 Series Tester Features:

  • A large, easy-to-read display that facilitates work and easily presents measurement results, i.e. connection map test, lengths, cable identification, as well as indication of the location of cable damage.
  • Test of UTP, FTP, SSTP cabling - RJ45 connector, RJ11/12 connector, cabling based on 75Ω, 50Ω, 93Ω coaxial cables - F connector.
  • Length measurement (up to 460 m, measurement error of 0.3 m).
  • Full test of twisted-pair cable connection map, indicating the location of damage (distance to damage).
  • Detection of the following defects: discontinuity, short circuit, inverted pairs, crossed pairs.
  • Locating cables and individual cable pairs. MicroScanner operates in tone generator mode (analog or digital) in tandem with the IntelliTone 200 sampler.
  • Locate cables using remote line identifiers (Identifier Kit #2-7, FL-MS2-IDK27- included in the kit ). The tester recognizes the identifier number plugged into the other end of the track (cable).
  • Signal detection of Ethernet (10/100/1000 Ethernet, Half/Full duplex transmission mode), POTS and PoE (detection of POE devices according to 802.3af standard).
  • The meter's durable rubber housing cover provides high resistance to mechanical damage and ensures maximum comfort during operation.

More product information



Description

MicroScanner2 makes it possible to check the mechanical parameters of copper-based cabling, and to detect and locate defects. Universal copper cabling tester. MicroScanner2 has a very wide application in network cabling based on multi-pair cables (UTP, FTP, SSTP - RJ45 connector and RJ12/11 connector), coaxial cables (75 Ω, 50 Ω, 93 Ω - F connector) and single cable pairs. It allows quick verification of the correctness of connections, identification and localization of defects and measurement of the length of individual cable sections. With the help of a tone sampler or remote line identifiers, it allows quick localization of individual connections, individual cable pairs as well as allows maintenance staff to find the correct cable termination in the patch cabinet without errors. In addition to analyzing the physical layer of the cabling, it enables detection of Ethernet signals. MicroScanner2 is an excellent tool for cabling installers as well as maintenance personnel responsible for maintaining even network structures.

Technical details

  • Environmental specifications:
  • Operating temperature: 0°C to 45°C
  • Storage temperature: -20°C to +60°C
  • Relative humidity during operation (% RH non-condensing): 90% (10°C to 35°C); 75% (35°C to 45°C)
  • Shock and vibration: Random, 2 g, 5 Hz-500 Hz (Class 2), Drop test from a height of 1 m with and without the included connection map adapter
  • Safety: IEC 61010-1, third edition
  • Altitude of use: 4,000 m; Storage: 12,000 m
  • EMC: IEC 61326-1
  • General specifications:
  • Test connectors: Test connectors: Shielded 8-pin modular jack compatible with 8-pin modular plugs (RJ45) and 4-pin modular plugs (RJ11). MicroScanner 2: F connector for coaxial cable.
  • Power: Battery type: 2 AA alkaline batteries (NEDA 15A, IEC LR6) Battery life: 20 hours of typical use Other compatible battery types: 2 AA lithium batteries, NIMH, NICAD
  • Dimensions and weight (with batteries installed and connection map adapter included): 7.6 cm x 16.3 cm x 3.6 cm, weight 300 g
  • Screen: Monochrome LCD display with backlighting
  • Test modes:
  • It measures length, verifies the connection map, identifies remote ID locators and detects Ethernet ports. MicroScanner also displays the message: HIGH Ω when the cable resistance is greater than 12.5 Ω. All results are displayed on a single screen.
  • Technical data:
  • Tested cable types: Twisted-pair: UTP, FTP, SSTP Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
  • Length test: Range: 460 m (1500 ft)
  • Resolution: 0.3 m (1 ft)
  • Typical accuracy: ± 4% or 0.6 m (2 ft), whichever is greater. NVP uncertainty is an additional error.
  • Calibration: user-set NVP for twisted-pair and coaxial cable (MicroScanner2). Can determine actual NVP with known cable length.
  • Connection Map Test: Detects faults, short circuits, wiring errors, split pairs and up to seven line adapter IDs. The connection map is drawn with proportional length to visually indicate the approximate location of faults.
  • Ethernet Port Detection: Detects the recommended speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps and 1 Gbps.
  • Tone generator:
  • Supports toning and cable mapping with the IntelliTone digital probe. Generates four tones compatible with typical analog probes.
  • The SmartTone ™ function provides positive identification of cables in bundles when using an IntelliTone or analog probe.

Package content

  • MS2-100 equipment:
  • MicroScanner2 tester
  • Remote adapter (FL-MS2-WM, top of tester, also line identifier #1)
  • Getting Started Guide on CD (Getting Started Guide)
  • Battery type AA (pcs. 2)
  • Tester cover

Downloads and Certificates

Datasheet

QIG

Logistics

  Number
(pcs)
Weight
(kg)
Depth
(cm)
Width
(cm)
Height
(cm)
cm³
Packaging Unit Carton 1 0,60 8,00 16,00 26,00 3.328,00
Packaging Unit Inside 1 0,60 8,00 16,00 26,00 3.328,00
Packaging Unit Single 1 0,60 8,00 16,00 26,00 3.328,00
Customs tariff number: 9031808000

Customers who bought this product also bought

HDMI
HDMI Premium High Speed Connection Cable, Type A M/M, 5.0m, w/Ethernet, Ultra HD, 4K@60Hz, gold, bl
Item No.: DK-330123-050-S
Patch Cords - CAT 6A
CAT 6A S-FTP patch cord, Cu, LSZH AWG 26/7, length 3 m, 10 pieces, color black
Item No.: DK-1644-A-030-BL-10
19" Wall Mounting Brackets
4U wall mounting patch bracket, 195x505x250 mm adjustable depth, stackable, black (RAL 9005)
Item No.: DN-19 PB-4U-SW
USB
USB Type-C adapter, type A to C M/F, 3A, 5GB, 3.0 Version, bl
Item No.: AK-300524-000-S
Shelves
1U fixed shelf for racks from 400 mm depth 45x482x250 mm, up to 15 kg, black (RAL 9005)
Item No.: DN-19 TRAY-1-SW