DIGITUS Série Individual de Caixa de Servidor DIGITUS – 600 mmx1000 mm (PxD)

Número do produto DN-19 SRV-42U-B-1

4016032332404

42U server rack, Unique, 2050x600x1000 mm perforated steel doors, color black (RAL 9005)

A série DIGITUS® Unique foi fabricada, concebida e desenvolvida para corresponder aos mais elevados requisitos da infraestrutura de TI.

Special roof construction for fan unit, incl. perforated cover
Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)
Sliding cable entry with rubber sealing on the top and base

More product information

Distribution Partner Overview

Descrição

The server cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets to the side in the roof and floor equipped with brushes (starting with a cabinet width of 800 mm), a sliding inlet with foam rubber seal as well as an additional rear brush inlet in the floor structure, enable versatile use in a wide range of application scenarios. Single perforated front doors and double perforated back doors, including swing handle with profile half-cylinder, ensure improved air circulation. The roof is equipped with a perforated cover for improved air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design (horizontally separated starting from 42 rack units) improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

Technical details

Classe de proteção IP20
Porta traseira de duas folhas
Porta traseira de duas folhas
Os painéis laterais são bloqueáveis e amovíveis
Calhas de perfil de 483 mm (19“) no lado frontal e traseiro, montadas no armário, galvanizadas
Calhas de perfil de 483 mm (19“) no lado frontal e traseiro, montadas no armário, galvanizadas
As calhas de perfil de 483 mm (19“) podem ser ajustadas em profundidade e estão providas com marcação da unidade de altura
Os suportes de profundidade embutidos proporcionam estabilidade
Os suportes de profundidade embutidos proporcionam estabilidade
Vários pontos de ligação terra no armário, para componentes embutidos
Vários pontos de ligação terra no armário, para componentes embutidos
É fornecido completamento montado
Cabinet type: Server cabinet
Color: black, RAL 9005
Depth: 1000 mm
Front door: Steel door, perforated, single opening
Load capacity: 1000 kg
Rear door: Steel door, perforated, double opening
Side panels: Both sides
Units: 42
Width: 600 mm
IP protection class: IP20
Mounted: yes

Package content

Earthing wire set
Installation set (screws, cage nuts, washers)
Installation Kit for Profile Half Cylinder
2 x Keys

Downloads and Certificates

Ficha de dados

Manual

QIG

QIG Fan units EN DE

Logística

	Número (pcs)	Peso (kg)	Profundidade (cm)	Largura (cm)	Altura (cm)	cm³
Embalagem em Cartão	1	115,00	105,00	65,00	205,00	1.399.125,00
Embalagem Interior	1	115,00	105,00	65,00	205,00	1.399.125,00
Embalagem Única	1	115,00	105,00	65,00	205,00	1.399.125,00

Número de taxa alfandegária: 9403208000

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.