DIGITUS CAT 5e SF/UTP патч-кабель

Номер изделия: DK-1532-005/G

EAN: 4016032199649

CAT 5e SF-UTP patch cable, PVC AWG 26/7, length 0.5 m, color green

Отличная производительность и качество связи для Вашей сети.

Transparent blue colored plug with metal shielding for easy identification of Category 5e (100 MHz)

More product information

Distribution Partner Overview

Описание

The DIGITUS® Category 5e Class D patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 5e specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 5e cabling. The performance is tested up to 100 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking.You can easily identify the Category 5e, because of the transparent blue colored connector.

Technical details

2 разъема RJ45 (8P8C)
Колпачки с защитой от излома, натяжения и перегиба
Метки длины на оболочке
Assortment: Twisted Pair Patch Cables
Configuration: 1:1
Connector 1: Modular RJ45 (8/8) plug
Connector 2: Modular RJ45 (8/8) plug
Packaging: DIGITUS Polybag
Category: CAT 5e
Shielding: SF-UTP, foil and braid shielding
Length: 0.5 m
Color: green
Jacket: PVC
Slim Version: no
Structure: 4 x 2 AWG 26/7, twisted pair
Flat Version: no

Downloads and Certificates

Техническое Описание

Логистика

	Количество (pcs)	Вес (kg)	Глубина (cm)	Ширина (cm)	Высота (cm)	cm³
Единица Упаковки Коробка	250	7,00	36,00	36,00	27,00	34.992,00
Единица Упаковки Внутри	10	0,28	5,50	22,00	26,00	3.146,00
Единица Упаковки Одна	1	0,03	1,10	11,50	21,00	265,65

Код ТН ВЭД: 8544421000

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Ensure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.