DIGITUS Conector SATA

Número do produto AK-400102-005-R

4016032299950

SATA connection cable, L-type, w/ latch F/F, 0.5m, straight, SATA II/III, re

Com fecho para uma ligação segura

More product information

Distribution Partner Overview

Descrição

Este cabo de dados interno é usado para ligar Discos Rígidos ATA-Serial, bem como Gravadores CD-/DVD/Blue-Ray por exemplo à Placa principal. É também compatível com SATA inferior a rev. II/I

Technical details

Assortment: SATA Cables
AWG: 28
Color cable: red
Color connector: black
Connector 1: SATA (7pin) connector, L-type
Connector 2: SATA (7pin) connector, L-type
Data rate: 6 Gbit/s
Hoods: molded
Interlock: Metal latch
Packaging: Polybag
Style: Flat cable
Version: SATA Revision 3
Wire material: CU
Length: 0.5 m
Shielding: Unshielded

Downloads and Certificates

Ficha de dados

Datasheet PT

Logística

	Número (pcs)	Peso (kg)	Profundidade (cm)	Largura (cm)	Altura (cm)	cm³
Embalagem em Cartão	300	6,10	46,00	32,00	25,00	36.800,00
Embalagem Interior	10	0,20	19,00	16,00	5,00	1.520,00
Embalagem Única	1	0,02	14,00	9,00	2,00	252,00

Número de taxa alfandegária: 8544429090

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.