DIGITUS Módulo IP para comutadores KVM

Número do produto DS-51000-1

4016032430018

IP function module for KVM switches for DS-23200-2, DS-23300-3, remote control

Acesso remoto através de LAN, WAN ou Internet

Acesso remoto através de LAN, WAN ou Internet
Controlo total em todos os sistemas operativos, nas configurações BIOS, durante o arranque ou em ecrãs azuis

Distribution Partner Overview

More product information

Descrição

Os módulos IP DIGITUS® são ideais para utilização de comutadores KVM em salas de servidores pequenas e médias, nas quais tem de ser garantido o acesso do administrador em qualquer altura e a partir de qualquer lugar. Proporcionam ligação direta através de um comutador KVM ligado ao computador, através de uma ligação à Internet existente.

Technical details

Acesso remoto KVM (teclado, monitor, rato) através de IP
Acesso remoto através de LAN, WAN ou Internet
Controlo total em todos os sistemas operativos, nas configurações BIOS, durante o arranque ou em ecrãs azuis
Comutador de seleção de porta remota
Manutenção à distância através de interface Web
Codificação DES de todos os dados transmitidos
Acesso IP com 10/100/1000 Mbps através de LAN

Package content

Módulo IP para comutadores KVM
GIR (Guia Instalação Rápida)

Downloads and Certificates

Firmware

Manual

Logística

	Número (pcs)	Peso (kg)	Profundidade (cm)	Largura (cm)	Altura (cm)	cm³
Embalagem em Cartão	10	1,50	32,00	28,50	33,00	30.096,00
Embalagem Interior	1	0,15	16,20	7,80	3,00	379,08
Embalagem Única	1	0,15	16,20	7,80	3,00	379,08

Número de taxa alfandegária: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions.
Follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
If this appliance falls, it can cause serious damage.
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
This device is designed for the IT distribution system with 100 V - 230 V voltage.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
If an extension cable is used for the appliance, make sure that the total capacity of all products using the cable does not exceed the current load.
Ensure that the total current of all products connected to the socket does not exceed 15 A.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable or plug is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.