DIGITUS Защита обжимных соединений

Номер изделия: AL-SK3

EAN: 4016032007364

Fiber Optic Crimp Splice Protection 1 Tray with 12pcs.

Накладная защита стыка оптического волокна

	Количество (pcs)	Вес (kg)	Глубина (cm)	Ширина (cm)	Высота (cm)	cm³
Единица Упаковки Коробка	200	2,50	30,00	30,00	10,00	9.000,00
Единица Упаковки Внутри	10	0,13	10,00	5,00	3,50	175,00
Единица Упаковки Одна	1	0,01	9,50	4,50	0,40	17,10

Код ТН ВЭД: 8544700000

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product specifications for the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.