Digitus AL-SK3 protetor de cabos Metálico

Número do produto AL-SK3

4016032007364

Digitus AL-SK3, Metálico, 1,2 x 3,2 x 30 mm

Digitus AL-SK3. Cor do produto: Metálico. Dimensões (CxLxA): 1,2 x 3,2 x 30 mm

Características:

Pesos e dimensões:

	Número (pcs)	Peso (kg)	Profundidade (cm)	Largura (cm)	Altura (cm)	cm³
Embalagem em Cartão	200	2,50	30,00	30,00	10,00	9.000,00
Embalagem Interior	10	0,13	10,00	5,00	3,50	175,00
Embalagem Única	1	0,01	9,50	4,50	0,40	17,10

Número de taxa alfandegária: 8544700000

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product specifications for the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.