DIGITUS Comutador Gigabit de 8 portas de 10 polegadas

Número do produto DN-80114

4016032441007

Gigabit Ethernet Switch 8-port, 10 inch, unmanaged

Ideal para utilização em caixas de parede de 10"

8 x 10/100/1000Base-T ports: Provides high flexibility and speed for your network devices
Network standards: Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x standards, ensuring broad compatibility
Non-blocking, non-head-of-line forwarding: Ensures that your data is transferred quickly and efficiently, without delays
Back-pressure and bandwidth control: Enables precise control and management of bandwidth on each port
Store-and-forward technology: Optimizes data transfer by temporarily storing and checking packets before they are forwarded
Automatic speed and duplex detection: Automatically detects and adjusts the speed and duplex mode (20 / 200 / 2000 Mbit in full duplex mode)
Auto MDI/MDI-X function: Simplifies cabling as no crossover cables are required
16Gbps backplane: Ensures a high data transfer rate and efficient network performance
Supports up to 8K MAC addresses: Provides enough capacity for growing networks
Power consumption: Low power consumption of only 5 watts

More product information

Distribution Partner Overview

Descrição

O comutador Ethernet Gigabit 8 portas DIGITUS® fornece 8 portas RJ45 de auto negociação 10/100/1000 Mbps. Função de todas as portas com suporte MDI/MDIX automático, eliminando a necessidade de cruzamento de cabos ou de portas de uplink. Custos reduzidos, facilidade de uso e elevado desempenho são os pontos fortes do comutador Ethernet Gigabit 8 portas DIGITUS® que o tornam uma boa escolha para a sua rede. Graças às suas dimensões compactas, o interruptor pode ser instalado numa caixa de parede de 10 polegadas. Os ângulos de montagem estão incluídos no produto.

Technical details

8 x 10/100/1000 Base-T
Compatível com redes normais IEEE 802.3, IEEE 802.3u, IEEE 802.3ab e IEEE 802.3x
Fornece não bloqueamento, avanço de início de fila
Suporta tomada de pressão e controlo de largura de banda em cada porta
Tecnologia Store-and-Forward para uma transferência de dados otimizada
Deteção/ajuste de velocidade automáticos e Duplex semi/total
20/200/2000 Mbit no modo full duplex
Auto MDI/Função MDI-X
Barramento com 16Gbps
Suporta endereços MAC até 8K
Fonte de alimentação integrada
Consumo de energia: 5 W
Temperatura de funcionamento: 0°C~40°C
Dimensões: (C x L x A): 250 x 150 x 42 mm
Number of ports: 8
Ethernet speed: Gigabit
Industrial usage: no
Installation type: 10 inch, Desktop
Managed: no
Outdoorsuitable: no
PoE (Power over Ethernet): no
Protection against vanadlism: no
VLAN: no

Package content

Comutador Gigabit de 8 portas de 10 polegadas
Peso: 20 g
Cabo de alimentação
Acessórios de montagem

Downloads and Certificates

Certificate

ext. Link

Ficha de dados

Datasheet PT

Manual

Logística

	Número (pcs)	Peso (kg)	Profundidade (cm)	Largura (cm)	Altura (cm)	cm³
Embalagem em Cartão	8	11,50	49,00	33,00	26,50	42.850,50
Embalagem Interior	1	1,44	32,00	24,00	6,70	5.145,60
Embalagem Única	1	1,44	24,00	32,00	6,70	5.145,60

Número de taxa alfandegária: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions and follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable, power supply unit or plug for the power supply is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.