DIGITUS 8-Port Gigabit Switch, 10 inch, Unmanaged

Product number: DN-80114

EAN: 4016032441007

Gigabit Ethernet Switch 8-port, 10 inch, unmanaged

Ideal for use in 10" wall-mounted enclosures

8 x 10/100/1000Base-T ports: Provides high flexibility and speed for your network devices
Network standards: Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x standards, ensuring broad compatibility
Non-blocking, non-head-of-line forwarding: Ensures that your data is transferred quickly and efficiently, without delays
Back-pressure and bandwidth control: Enables precise control and management of bandwidth on each port
Store-and-forward technology: Optimizes data transfer by temporarily storing and checking packets before they are forwarded
Automatic speed and duplex detection: Automatically detects and adjusts the speed and duplex mode (20 / 200 / 2000 Mbit in full duplex mode)
Auto MDI/MDI-X function: Simplifies cabling as no crossover cables are required
16Gbps backplane: Ensures a high data transfer rate and efficient network performance
Supports up to 8K MAC addresses: Provides enough capacity for growing networks
Power consumption: Low power consumption of only 5 watts

More product information

Distribution Partner Overview

Description

The DIGITUS® 8-Port Gigabit Ethernet Switch provides 8 10/100/1000 Mbps RJ-45 ports with auto-negotiation. All ports support the Auto MDI/MDIX function, which eliminates the need for crossover cables and uplink ports. Low cost, ease of use and high performance are the strengths of the DIGITUS® Gigabit Ethernet 8-Port Switch, making it an excellent choice for your network. Thanks to its compact dimensions, the switch can be installed in 10-inch wall-mounted housings. The mounting brackets are included with the product.

Technical details

8 x 10/100/1000Base-T
Complies with the network standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x
Supports non-blocking, non-head-of-line forwarding
Supports back-pressure and bandwidth control on each port
Store-and-forward technology for optimized data transfer
Automatic speed and half/full duplex detection/adjustment
20 / 200 / 2000 Mbit in full duplex mode
Auto MDI/MDI-X function
Backplane with 16Gbps
Supports up to 8K MAC addresses
Integrated power supply unit
Power consumption: 5 watts
Operating temperature: 0 °C - 40 °C
Dimensions: (L x W x H): 250x150x42 mm
Power supply: AC 100V～240V
Number of ports: 8
Ethernet speed: Gigabit
Industrial usage: no
Installation type: 10 inch, Desktop
Managed: no
Outdoorsuitable: no
PoE (Power over Ethernet): no
Protection against vanadlism: no
VLAN: no

Package content

8 port 10 inch Gigabit switch
Quick start guide
Power cable
Mounting accessories

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

Manual

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	8	11,50	49,00	33,00	26,50	42.850,50
Packaging Unit Inside	1	1,44	32,00	24,00	6,70	5.145,60
Packaging Unit Single	1	1,44	24,00	32,00	6,70	5.145,60

Customs tariff number: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions and follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable, power supply unit or plug for the power supply is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.