100Gbps QSFP28 Active Optical Cable 5 m

DIGITUS 100Gbps QSFP28 Active Optical Cable 5 m

Product number: DN-81625
EAN: 4016032480983

100G QSFP28to QSFP28 Active Optical Cable MMF 850nm 5m

100 Gigabit Ethernet links, Infiniband interconnect, Data center cabling infrastructure. Compatible brands: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTE

  • 4 channels full-duplex transceiver modules
  • 4 channels 850nm VCSEL array, 4 channels PIN photo detector array
  • Transmission data rate up to 28.05Gbps per channel, 100Gbps total
  • Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
  • Hot Pluggable QSFP form factor, Single MPO connector receptacle
  • Built-in digital diagnostic functions
  • 3.3V power supply voltage; Low power consumption <3.5W
  • Operating case temperature 0°C to +70°C
  • Compatible brands: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

More product information

Distribution Partner Overview

Description

"DIGITUS® 100G QSFP28 AOC active cables are a high-performance, low-power short-range interconnect solution. They are compliant with the SFF-8431 SFP+ Electrical MSA, SFF-8432 SFP+ Mechanical MSA and QSFP28 MSA compliant. 4 full-duplex channels are used, with each channel capable of transferring data at speeds up to 25Gb/s, resulting in an aggregate rate of up to 103.1Gb/s. DIGITUS® 100G QSFP+ AOC active cables offer increased port density and cost savings in the overall system. The specific programming of each QSFP28 cable can safely ensure adaptation to the needs of any IT environment. "

Technical details

  • Length: 5 m
  • 4 channels full-duplex transceiver modules
  • 4 channels 850nm VCSEL array, 4 channels PIN photo detector array
  • Transmission data rate up to 28.05Gbps per channel, 100Gbps total
  • Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
  • Hot Pluggable QSFP form factor, Single MPO connector receptacle
  • Built-in digital diagnostic functions
  • 3.3V power supply voltage; Low power consumption <3.5W
  • Operating case temperature 0°C to +70°C
  • RoHS 6 compliant (lead free)
  • SFF-8431 SFP+ Electrical MSA
  • SFF-8432 SFP+ Mechanical MSA
  • Storage Temperature: -40 - 85 °C
  • Compatible brands: Allnet, Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
  • DDM Support: no

Package content

  • 1 x 5m AOC Cabel

Downloads and Certificates

Certificate

Datasheet

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 90 15,00 48,00 48,00 38,00 87.552,00
Packaging Unit Inside 1 0,17 0,00 0,00 0,00 0
Packaging Unit Single 1 0,17 26,00 26,00 3,00 2.028,00
Customs tariff number: 8517620000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com