DIGITUS Zero-Modem Connection Cable

Product number: AK-610100-030-E

EAN: 4016032301042

Zero-Modem connection cable, D-Sub9 F/F, 3.0m, snap-hoods, be

Enables a save and stable connection

No inadvertent removing of connector possible

More product information

Distribution Partner Overview

Description

With this cable the pins are exchanged for sending and reception. Thus a direct data exchange is possible between 2 PCs or also PC and SAT-Receiver. This enables to bring the SAT-Receiver by updates on the newest state.

Technical details

The additional screw combination in at the entrance as well as at the exit provides by the professional application for maximum security. Simply turn the screw cap in the intended socket - ready. The inattentive remove of the D-Sub plug is not possible an
Assignment: 1-4, 2-3, 3-2, 4-1, 5-5, 7-8, 8-7, 9-9, S-S
Assortment: Serial Cables
Color cable: beige
Color connector: beige
Connector 1: DSUB, 9-pin, jack
Connector 2: DSUB, 9-pin, jack
Connector surface: nickel-plated
Hoods: snap hood
Length: 3 m

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	50	6,90	32,00	29,00	24,00	22.272,00
Packaging Unit Inside	10	1,38	33,00	36,00	8,00	9.504,00
Packaging Unit Single	1	0,14	24,00	15,00	3,50	1.260,00

Customs tariff number: 8544429090

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.