DIGITUS FTTH Drop Cable, Singlemode, 4 Fiber, 4 LC/APC, 50 m

Product number: DK-3904LCA-50

EAN: 4016032494669

FTTH Drop Cable, Singlemode, 4 Fiber, LC/APC G.657.A2, 50m

High-quality cable offers an excellent option for fiber optic connections in the designated network level 4. Installation is made easier with preassembled connectors for all 4 fibers on one end of cable.

Significantly reduces installation time
Pre-assembled with LC/APC connectors on one side
The open end can simply be pulled in or laid to the house distribution unit
G.657A2 bend-optimised
Stable pulling loop for pulling the cable into duct systems

More product information

Distribution Partner Overview

Description

The growing requirement for extending Fiber networks into the home demands products that enable an easy and effecient installation to realize the network. The Digitus cable offers the possibility to easily extend and complete the fiber network inside the home. The cable is designed to be used as the connection line between building distributor and floor distributor or subscriber termination point in network level 4. The easiness of installation comes from the fact that the cable is preassembled with LC/APC connectors on subscriber end and the open can then be installed through duct to the distributor acting as entry point for fiber network in building.

Technical details

Fiber type : Singlemode 9/125
Category : G657A2
Cable length : 50 m
Number of fibers : 4
Fiber Color : Blue, Green, Yellow, Red
Connector type : LC/APC
Sheath color : White
Sheath material : LSZH
Stranding element : Kevlar Yarn
Cable construction : Dca
Cable diameter : 4,0mm
Diameter of pulling aid : 7-8cm (length)
Min. Bending radius of cable : 10D/20D
Tensile strength : 400N
Compressive strength : 1000N
Connector insertion loss : ≤0.3dB
Connector return loss : ≥60dB
Storage temperature : -40~+80
Working temperature : -20~+70
Cable Weight : 0,63kg
Application: universal
Cable diameter: 4 mm
Cable jacket: LSOH
Color cable: white
Connector 1: LC (APC)
Fiber class: OS2
Fiber diameter: 9/125µ
Mode: Singlemode
Number of fibers: 4
Polishing: APC
Length: 50 m

Package content

1 x FTTH Cable, Singlemode, 4 Fiber, 4 x LC/APC, 50 m

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	9	7,90	42,00	41,00	30,00	51.660,00
Packaging Unit Inside	1	0,88	5,50	25,00	25,50	3.506,25
Packaging Unit Single	1	0,88	5,50	25,00	25,50	3.506,25

Customs tariff number: 8544700000

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com

Customers who bought this product also bought

19" Wall Mounting Cabinets - Mounted

Pigtails