DIGITUS Network Rack Unique Series - 800x1000 mm (WxD)

Product number: DN-31122

EAN: 4016032476429

42U network cabinet, Unique, 2053x800x1000 mm open rack, grey

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany

Special roof construction for fan unit with added lid which can be unmounted
Sliding cable entry with rubber sealing on the base
Open frame without doors or side walls for easy access and individual extension
Rack is completely mounted

More product information

Distribution Partner Overview

Product comparison table ›

‹

›

Description

The network cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets in the roof and floor equipped with brushes (starting with 26 rack units and a cabinet width of 800 mm), a sliding inlet in the floor structure with foam rubber seal and brush management panels on the back above and below the rear door (starting with 26 rack units) enable versatile use in a wide range of application scenarios. Vertical cable channels with brackets installed next to the profile rails (starting with a cabinet width of 800 mm) round off the design. An offset, removable cover with ventilation slits ensures enhanced air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

Technical details

incl. 4 pieces of leveling feet already pre-configured under the rack
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
Built-in depth support bars for more stability
Sliding cable entry with rubber sealing on the base
Special roof construction for fan unit with added lid which can be unmounted
Several earthing points for rack components
Equipment mounting depth min.-max.: 688-943 mm
Cabinet type: Network cabinet
Color: light grey, RAL 7035
Depth: 1000 mm
Front door: without
Load capacity: 800 kg
Rear door: without
Side panels: Without
Units: 42
Width: 800 mm
IP protection class: without
Mounted: yes

Package content

1x Network cabinet
Installation set (36 x screws, 36 x captive nuts, 36 x washers)
1x Adapter for profile half-cylinder
4x Grounding cables (incl. nuts and washers)
2x Keys

Downloads and Certificates

Datasheet

Datasheet EN

Manual

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	100,00	85,00	105,00	210,30	1.876.927,50
Packaging Unit Inside	1	100,00	85,00	105,00	210,30	1.876.927,50
Packaging Unit Single	1	100,00	85,00	105,00	210,30	1.876.927,50

Customs tariff number: 9403208000

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be neatly routed and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.