100G QSFP28 DAC Cable 1m, AWG 30

DIGITUS 100G QSFP28 DAC Cable 1m, AWG 30

Product number: DN-81601
EAN: 4016032481041

100G QSFP28 Direct Attach Cable Up to 28.3125Gbps data rate per channel 1m

100G QSFP28 DAC cable, 1 m AWG30

  • 100G QSFP28 DAC cable, 1m
  • Maximum data transfer rate: 100 Gb/s ( 4x 25 Gb/s)
  • 100G QSFP28 to QSFP28
  • AWG 30, full duplex channels
  • Maximum supported data rate per channel 28.3125 Gbps
  • The connector is compatible with the SFF-8665 specification
  • Power: + 3.3V supply voltage
  • AWG: 30
  • Compatible with the following manufacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

Distribution Partner Overview

More product information

Description

The Digitus® QSFP28 100G DAC cables are the ideal connection between switches in the backbone area. The 100G QSFP28 to QSFP28 Direct Attach Cable copper cable assemblies(DAC) are a low cost alternative for short reach applications. It is compliant with 100G Ethernet (100GBASE-CR4) specifications. It contains four high-speed copper pairs, each operating at data rates of up to 25GbE. So the QSFP28 DAC cable assembly is suitable for power-efficient connectivity for short distance interconnects, such as Data center, enterprise storage systems and High-Performance Computing.

Attributes

  • DDM Support: no

Package content

  • QSFP28 100G DAC cable 1m

Downloads and Certificates

Certificate

Datasheet

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 100 15,00 48,00 48,00 38,00 87.552,00
Packaging Unit Inside 1 0,15 0,00 0,00 0,00 0
Packaging Unit Single 1 0,15 26,00 26,00 3,00 2.028,00
Customs tariff number: 8517620000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
  • eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com