DIGITUS Fast Ethernet Media Converter, RJ45 / SC

Product number: DN-82021-1

EAN: 4016032293101

Fast Ethernet Media Converter, Singlemode SC connector, 1310nm, up to 20km

The perfect converter solution for various fiber media

Distance up to 20km
Sends data in high quality and additionally provides excellent reliability
Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet standards

More product information

Distribution Partner Overview

Description

The Media Converters from DIGITUS are the ideal solution for the migration of Copper and Fiber Network Signals. From now on, you are able to access the Fiber Technology and transfer network signals over several kilometers without renewing your whole Network Infrastructure. The huge variety of Products fulfil your individual needs. The intiutive operation guarantees a quick and easy Installation. The Link Fault Pass Through function offers a no-fear-networking. Your Network Administrator will be able to find and solve Network problems easily. Years of Experience and a wide range of products lets DIGITUS become a reliable Partner for your Network.

Technical details

Transforms wire based network media to fiber optic
High quality and excellent reliability
10/100Base-TX to 100Base-FX
Connectors: 1x RJ45, 1x SC duplex
Distance up to 20km
Wavelength: 1310nm
Singlemode Dual Fiber
Automatic cable detection - auto MDI / MDI-X function
Auto-negotiation of full- and half-duplex
Diagnostic and monitoring LEDs for the status of power, link and act of the ports
Link Fault Pass Through (LFP) function for easier network maintenance
Suitable for 9/125µm Fiber Cables
Transmission Power: Minimum -15 dBm, Maximum -8 dBm
Sensitivity Receiving Power: Minimum -38 dBm
Supported Standards: IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet
128kB data buffer
Operating temperature: 0 to 55°C
Dimensions (L x W x H): 95mm x 70mm x 26mm
Weight: 200g
Standalone Converter with external power supply
Input Supply Voltage: 5V DC
Max. Current: 800mA
Power Consumption: 2.5W
Connector 1: RJ45
Connector 2: SC
Mode: Singlemode
Distance (km): 20
Industrial usage: no
Broadcasting Mode: Unidirectional
PoE injector: no
Ethernet speed: Fast Ethernet

Package content

Media Converter
Quick installation guide
Power adapter

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

QIG

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	20	9,00	30,00	27,00	55,00	44.550,00
Packaging Unit Inside	1	0,45	6,00	21,60	16,10	2.086,56
Packaging Unit Single	1	0,45	6,00	21,60	16,10	2.086,56

Customs tariff number: 8517620000

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.