DIGITUS Gigabit Ethernet PCI Network Card

Product number: DN-10110

EAN: 4016032310778

Gigabit Ethernet PCI Card 32-bit, low profile bracket, RTL8169SC chipset

Unprecedented speed is now available over your existing network cabling - Built to run the fastest network applications

Gigabit Ethernet PCI Card,32-bit, low profile bracket, RTL8169SC chipset

Supports 10/100/1.000 Mbps auto negotiation
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab compatible
IEEE 802.3x full-duplex and flow control
Supports Autonegotiation and Crossover detection
Realtek Chipset
PCI Local Bus Master Rev.2.1 and 2.2 compatible
Suitable for all common network environments
Additional Low Profile Bracket to use the Card also in Thin Computers
Operating temperature: 0 °C - 70 °C
Operating humidity: 25% - 65% RH (non-condensing)
Supports Windows 10, 8.1, 8, 7, Vista, XP, Mac OS X and Linux
Chipset: Realtek RTL8169SC Gigabit Ethernet Controller
Bus: PCI V2.2, 32/64-bit, 33/66MHz
IEEE802.3, IEEE802.3u, and IEEE802.3ab compliant.
Support for IEEE802.3x Full-Duplex flow control
Support IEEE802.1Q Virtual LAN (VLAN) Tag
Complaint to PC97, PC98, PC99 and PC2001 standards
Auto-Negotiation support for Auto-Detect 10/100/1000Mbps data rate and Full/Half-Duplex operation mode
Support ACPI and PCI power management
Automatic crossover support for crossover or regular cable
Support Boot ROM function (optional)
Support Wake on LAN function
One RJ-45 Port

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	40	6,30	38,00	41,00	41,00	63.878,00
Packaging Unit Inside	1	0,16	5,50	18,00	18,60	1.841,40
Packaging Unit Single	1	0,16	5,50	18,00	18,60	1.841,40

Customs tariff number: 8471800000

Switch off the computer completely and disconnect it from the power supply before installing or removing the network card.
Static discharge can damage the product or the PC. Take measures against static discharge (ESD) when installing the product, e.g. wear an antistatic wrist strap.
Before installation, touch the metal surface of the PC housing or another grounded object to ground any ESD charge via the housing.
Avoid using too much force when connecting the product to the PC.
Please ensure that any cables are connected correctly without overstretching or damaging them.
Avoid touching the contacts of the product with your fingers to prevent corrosion or static charge.

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com

Patch Cords - CAT 6