DIGITUS 8 Port Gigabit Switch, 10 Inch, Managed

Product number: DN-80117

EAN: 4016032464358

L2 managed Gigabit Ethernet Switch 8-port, 10 inch

L2+ managed Gigabit Switch - suitable for installation in 10-inch housing

8-Port 10/100/1000 Mbps
Network standards: IEEE802.3, IEEE802.3u, IEEE802.3ab
IEEE802.3x full-duplex flow control & IEEE 802.3ab link aggregation
Management interfaces: WEB, SNMP, SSH, CLI, Telnet
Port Control, Port Isolation, Loop Detection, Port Mirroring
Backplane bandwidth: 16 Gbps
VLAN features
L2+ layer features

More product information

Distribution Partner Overview

Description

The 8-port Gigabit L2+ Switch is designed for the networks of small to mid-sized companies. With special features such as port control, port mirroring, VLAN functions and multicast support, the switch is optimally tailored to the application convergence needs of mid-sized networks. Based on ASIC integration technology, non-blocking IP switching solutions are supported with gigabit speed. The switch can be used as a desktop switch or for installation in 10-inch housing. 8 gigabit ports are integrated that can be configured for specific requirements using various interfaces. The installation height is one rack unit.

Technical details

Number of ports: 8 x 10/100/1000Base-TX RJ45
Standards: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x full-duplex flow control, IEEE802.3ab link aggregation
Forwarding rate: 10/100/1000 Mbps
LED displays: Power, Link/Act
Backplane bandwidth: 16G
Forwarding capacity: 11.9 Mpps
Jumbo frame size: 16 K
MAC addresses: 8K
Port features: Port Control, Port Isolation, Port Loop Detection
Port mirroring: Multi to 1 Sniffer
VLAN: Port-based & 802.1q Tag-based VLANs
Link aggregation: 8 groups
Rate limit: 64kbps
Spanning tree: Supports STP, RSTP, MSTP
Ring protocol: Supports EAPS
Multicast: Supports 256 multicast groups & IGMP snooping for multimedia applications
Supports Static ARP & Static Routing, up to 32 VLAN interfaces
QoS: 4 lines per port, scheduling algorithm: WRR, SP, WFQ, port-based, MAC-based, 802.1p, DSCP classification
ACL: Standard IP, Extend IP, MAC IP, ARP, 512 entries
Security: MAC-based authentication, AAA/RADIUS authentication, WEB/Telnet password protection, Accessing privilege mode password protection
Supports SMNP
Supports ICMPv6, IPv6 Neighbor Discovery, MLD Snooping, IPv6 Telnet
Management interfaces: WEB, SNMP, CLI, Telnet, TACACS+, RMON
Power consumption: 15W max.
Operating voltage: 100 - 240 V AC, 50/60 Hz, integrated power adapter (IEC C13 plug for non-heating appliances)
Operating temperature: 0 °C to 40 °C
Storage temperature: -10 °C to +70 °C
Operating humidity: 20% - 85% (non condensing)
Housing: Metal (with protective conductor terminal)
Dimensions: W 250 x D 150 x H 44 mm
Weight: 1.140 kg (without packaging)
Number of ports: 8
Ethernet speed: Gigabit
Industrial usage: no
Installation type: 10 inch, Desktop
Managed: yes
Outdoorsuitable: no
PoE (Power over Ethernet): no
Protection against vanadlism: no
VLAN: yes

Package content

10 Inch 8 Port Gigabit Ethernet Switch, L2+ Managed
Power cord connection cable with coupling for non-heating appliances (IEC C13)
QIG

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

Manual

QIG

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	10	16,00	33,00	34,50	49,00	55.786,50
Packaging Unit Inside	1	1,60	7,00	24,00	32,00	5.376,00
Packaging Unit Single	1	1,60	7,00	24,00	32,00	5.376,00

Customs tariff number: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions and follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable, power supply unit or plug for the power supply is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.