8-Port Switch, 10/100 Mbps Fast Ethernet, Unmanaged, Metall Housing

DIGITUS 8-Port Switch, 10/100 Mbps Fast Ethernet, Unmanaged, Metall Housing

Product number: DN-80069
EAN: 4016032478676

Digitus 8-Port RJ 45 FE Switch 8 x 10/ 100 Mbit/s

8-port 10/100Mbps unmanage Fast Ethernet Switch, Auto-Negotiation RJ45 ports, All ports support Auto MDI/MDIX function

  • 8 x RJ45 ports 10/100 Mbps
  • All ports support 10/100 Mbps bandwidth
  • Network standards: IEEE 802.3i, IEEE 802.3u, IEEE802.3x, IEEE802.3az
  • Full-duplex flow control IEEE802.3x
  • Store and forward mode operates
  • Auto-negotiation / Auto-MDI/MDI-X
  • No configuration necessary
  • LED indicators for monitoring power, link/activity

More product information

Distribution Partner Overview

Description

The 8-Port 10/100 Mbps Networkswitch from DIGITUS® provides 5 x RJ45 ports with 10/100Mbps bandwidth each. Easily expand the existing network. No configuration is required on the switch itself; thanks to auto-negotiation and Auto MDI/MDI-X, cables and speeds are also automatically detected. The switch can be used as a desktop variant or mounted on a wall. Thanks to the external power supply, the switch does not need a fan at all. Ideal for expanding / setting up small home or company network.

Technical details

  • Number of ports: 8 x 10/100 Mbps
  • Network standards: IEEE 802.3i, IEEE 802.3u, IEEE802.3x, IEEE802.3az
  • Auto-negotiation: Auto MDI/MDIX
  • IEEE802.3x full-duplex flow control
  • Transfer method: Store-and-forward
  • Forwarding capacity: 745 Kpps
  • LED indicators: 10/100Mbps link
  • Jumbo frames: 1552 Byte
  • Buffer memory: 448 kbit
  • MAC addresses: 1K
  • Fanless design
  • Operating voltage: 5 V DC / 500 mA
  • Power consumption: 1,4 W max.
  • Power supply Power supply: 100 - 240 V AC, 50/60 Hz,
  • Plug type power supply: safety plug type-C
  • Plug type device side: DC plug 5.5 mm/2.1 mm
  • Operating temperature: 0°C to 40°C
  • Operating humidity: 10% - 90% RH (non-condensing)
  • Storage temperature: -40°C to 70°C
  • Fanless design (air flow cooling)
  • Dimensions: W 140 x D 67 x H 26 mm
  • Weight: 635 g
  • Number of ports: 8
  • Ethernet speed: Fast Ethernet
  • Industrial usage: no
  • Managed: no
  • Outdoorsuitable: no
  • PoE (Power over Ethernet): no
  • Protection against vanadlism: no
  • VLAN: no

Package content

  • 1 x 8-port Fast Ethernet Network Switch
  • 1 x power supply
  • 1 x Quick Start Guide

Downloads and Certificates

Certificate

Datasheet

QIG

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 45 17,70 35,50 48,80 26,20 45.388,88
Packaging Unit Inside 1 0,39 0,00 0,00 0,00 0
Packaging Unit Single 1 0,39 7,90 15,60 6,70 825,71
Customs tariff number: 8517620000

Safety notes

  • This product is intended for indoor use only.
  • Read all instructions and follow all warnings and instructions on the device.
  • Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
  • Do not use this appliance near water.
  • Do not place this appliance near or above a radiator.
  • The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
  • Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
  • The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
  • Do not spray any liquids onto the appliance.
  • Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
  • Clean the appliance with a damp cloth.
  • Connect the device according to the power supply on the rating plate.
  • To prevent damage to the appliance, it is important that all appliances are properly earthed.
  • Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
  • Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
  • Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
  • Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
  • Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
  • If any of the following conditions occur, unplug the appliance and return it to an authorized service centre for repair
  • The mains cable, power supply unit or plug for the power supply is damaged or worn;
  • Liquid has penetrated the appliance;
  • The device has been exposed to rain or water;
  • The device has been dropped or the housing has been damaged;
  • The function of the device has obviously changed;
  • The appliance cannot be operated as described in the operating instructions.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com