DIGITUS 4- Port Gigabit PoE Netzwerkswitch, Desktop, unmanaged, 1 Uplink Port RJ45, 60 W, af/at

Product number: DN-95330-1

EAN: 4016032484974

4+1 Port Ethernet Unmanaged PoE Switch 4 Port PoE, MDI/MDIX, IEEE802af,at

Gigabit Ethernet PoE Switch 4-port PoE + 1-port uplink, 60W PoE budget

Thanks to the PoE function, no additional power supply unit is required for the connected devices
Minimize cabling for wireless APs, IP telephones, and any other PoE capable device
Fanless design – perfect for office environments and meeting rooms
Gigabit Ethernet Speed
Additional Uplink Port
PoE power budget: 60 Watts
Supports PoE Power up to 32W for each PoE port
Support One-Key CCTV functions

More product information

Distribution Partner Overview

Description

The DIGITUS 5-Port Gigabit Desktop Switch with four Power over Ethernet ports and one additional uplink Port, offers your network significant improvement in terms of performance and efficiency. Thanks to PoE support, you only need a single (network) cable for power and data transfer. This switch makes it much easier to connect devices such as access points, network cameras, and IP telephones, and requires far less cabling than alternatives. It also allows you to extend your network in places where there are no power supply cables or sockets available. The switch does not require any configuration and therefore guarantees quick and seamless integration into the network. Moreover, the switch’s fanless design ensures soundless operation, which makes this device the perfect solution for office environments and meeting rooms.

Technical details

Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3x standards
Support IEEE802.3af, IEEE802.3at standards
Supports PoE: One to four ports (802.af, 15.4 Watts) or for two ports (802.3.at, 30 Watts)
Automatically detect PD devices
PoE power budget: 60 Watts
Auto detect power device; will not burned non-standard PoE device or normal PoE switch
Supports port power supply prioritization, guarantee the continuous power supply of key nodes
Line-speed forwarding, intelligent identification
Supports storage – and- forward for Data exchange
Support One-Key CCTV function
Ethernet speed: Gigabit
MAC Address Table: 2K, Auto-learning, Auto-aging
Switching Capacity: 10Gbps
Fanless
Power Supply: 65W
PoE Power on RJ45: Mode A 1/2(+),3/6(-)
Jumbo frame: 9K Bytes
Dimensions (L*W*H): 140*76.7*28mm
Industrial usage: no

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

QIG

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	20	14,50	35,30	32,00	40,30	45.522,88
Packaging Unit Inside	1	0,72	0,00	0,00	0,00	0
Packaging Unit Single	1	0,72	6,00	16,50	19,20	1.900,80

Customs tariff number: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions and follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable, power supply unit or plug for the power supply is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.