DIGITUS 8-Port Gigabit PoE Networkswitch, Desktop, L2 managed, 2 Uplinkports, SFP, 86 W, af/at

Product number: DN-95344

EAN: 4016032455103

L2 managed Gigabit Ethernet PoE Switch 8-port PoE + 2-port SFP, 86W PoE budget

Integrated Power over Ethernet (PoE) and network management features for small and medium network environments

8-Port 10/100/1000Base-T with PoE support
2-Port Gigabit SFP Uplink
Meets the network standards IEEE 802.3, IEEE802.3ad, IEEE802.1d, IEEE 802.3u, IEEE 802.3ab, IEEE802.1p, IEEE802.1x, IEEE802.1q, IEEE802.1w, IEEE802.1s, IEEE802.1z, IEEE802.3ah, IEEE802.1ag, IEEE 802.3af and IEEE802.3at
Supports Port Configuration, PoE Port Configuration, Port Mirroring, Bandwidth Control, Broadcast Power Control
Maximum PoE power of 86 watts

More product information

Distribution Partner Overview

Description

The DIGITUS® L2 managed Gigabit PoE Switch with 8 PoE+ ports and 2 Gigabit SFP ports is ideal for use in various network topologies such as SMBs. The extensive L2 configuration options allow you to increase the performance and efficiency of your network. The switch offers the possibility to segment the network via VLAN, the QoS feature ensures smooth data exchange for time-critical applications. The Spanning Tree Protocol or the Port Trunk can be used to create fail-safe connections with other switches. The switch can be managed via the web interface, SNMP, SSH or Telnet.

Technical details

8-Port 10/100/1000Base-T with PoE support
2-Port Gigabit SFP Uplink
PoE- Current output 44 ~ 57V DC voltage, max. 30 W per port
PoE Power Mode A, PIN 1/2(+), 3/6(-)
VLAN settings Port-based / Tag-based / MAC based / IP-based / Voice VLAN / VLAN mapping / Double VLAN
Trunk settings, Rapid Spanning Tree support (IEEE802.1d STP, IEEE802.1w RSTP, IEEEEEE802.1s MSTP
QoS support
MAC address filtering, TCP/UDP filtering
Tacacs+ and Radius authentication
Supports non-blocking, non-head-of-line forwarding
Supports back-pressure and bandwidth control at each port
Store-and-forward technology for optimized data transfer
Automatic speed and half/full duplex detection/adjustment
Auto MDI / MDI-X function
Backplane with 20Gbps
Supports up to 8K MAC addresses
Maximum output line 86 Watt
Power consmption: 5W
DC plug Size: 5.5x2.1mm
Number of ports: 8
PoE Power budget: 86 W
PoE standard: IEEE802.3at (PoE+)
Ethernet speed: Gigabit
Industrial usage: no
Installation type: Desktop, 19 inch
Managed: yes
Number of ports (Uplink): 2
Outdoorsuitable: no
PoE (Power over Ethernet): yes
Protection against vanadlism: no
Uplink port connection: SFP
VLAN: yes

Package content

8-Port L2 managed PoE Gigabit Switch
Quick start guide
Power supply
Mounting accessories

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

Manual

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	10	16,00	34,00	28,00	48,00	45.696,00
Packaging Unit Inside	1	1,60	10,00	16,50	27,50	4.537,50
Packaging Unit Single	1	1,60	3,90	11,50	25,00	1.121,25

Customs tariff number: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions and follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable, power supply unit or plug for the power supply is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.