DIGITUS 8- Port Gigabit PoE Networkswitch, Desktop, unmanaged, 60 W, af/at

Product number: DN-95357

EAN: 4016032485926

8+2 Port GE PoE Switch 8 Port PoE 802.3at, 10/100/1000 Mbps + 2 Port GE

CCTV function for 250 meters of ultra-long-distance transmission

Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)
Stand-up output power up to 30W
Support IEEE802.3 x full duplex flow control and Backpressure half duplex flow control
Panel lights to monitor working state and help fault analysis
Perfect security mechanism
Line-speed forwarding intelligent identification
Support CCTV Function
Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az)
Support PD-ALIVE function

More product information

Distribution Partner Overview

Description

DN-95357 has a CCTV function for 250 meters of ultra-long-distance transmission. Users can choose to turn on or off the CCTV function. Improve network security and restrain network storms, facilitate management and maintenance, and meet the networking and access requirements of enterprises, communities, hotels. office networks, and campus networks.

Technical details

Interface: 10＊10/100/1000Mbps auto-negotiation RJ45 port
PoE standard: IEEE802.3af/at
PoE port: 1~8
PoE total: 60W
Power supply: 65W
Key function: CCTV
PoE port output:Max 30W
RJ45 PoE power supply: Mode A Anode1/2 Cathode3/6
Indicator: PWR（Green）, LNK/ACT （Green）PoE（Orange）
Network media: 10BASE-T: UTP category 3,4,5 cable （≤100m）
100BASE-TX: UTP category 5, 5e cable （≤100m）
1000BASE-T: UTP category 5, 5e cable （≤100m）
MAC Address Table: 2K, Automatic study, automatic updates
jumbo frame: 9216Bytes
Packet buffer: 2Mbit
Transfer Mode: Store-and-forward
Packet Forward Speed: 14.88Mpps
Bandwidth: 20Gbps
Device Dimension: 168*93*32mm
green energy saving: Support IEEE（802.3az）
mains input: 100~240V AC, 50/60Hz
Operating Temperature: 0°C ~ 40 °C
Storage Temperature: -40 °C ~ 70 °C
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
Surge Protection: Common mode ±2KV, differential mode ±1KV
MTBF: >50000 hour
Electrostatic standard: Contact ±6KV, air ±8KV
Industrial usage: no

Package content

PoE Switch
User Guide
Power Cord

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

QIG

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	10	10,30	46,00	25,40	41,40	48.371,76
Packaging Unit Inside	1	1,03	0,00	0,00	0,00	0
Packaging Unit Single	1	1,03	23,70	19,20	8,70	3.958,85

Customs tariff number: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions and follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable, power supply unit or plug for the power supply is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.