DIGITUS 8 port Fast Ethernet network switch, industrial, unmanaged, 1 RJ45 uplink

Product number: DN-650106

EAN: 4016032458821

Industrial 8-Port Fast Ethernet Switch DIN rail, extended temp. range

Robust and durable industrial solutions with standard and top-hat rail mounting

Industrial 8-port Fast Ethernet switch
8 x 10/100Base-TX Ethernet ports
DIN rail mountable

More product information

Distribution Partner Overview

Description

The DIGITUS® Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to humidity, temperature fluctuations and vibrations. With a temperature range of -40°C to 80°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. Constant availability is guaranteed in highly sensitive areas such as transportation, production, traffic and security monitoring. Thanks to the simple plug-and-play system, the Industrial Fast Ethernet Switch can be quickly integrated into the respective environment. Thanks to its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for industrial environments.

Technical details

8 x 10/100Base-TX Ethernet ports
Automatic cable detection - Auto MDI / MDI-X function
Supported standards: IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX
IEEE802.3x Flow Control and Back Pressure
Store-and-forward technology for optimized data transfer
Automatic speed and half/full duplex detection/adjustment
Backplane with 1.6Gbps
MAC address memory 2K
Compact, robust metal housing
Excellent protection against short circuits
Lightning protection and surge protection
Redundant power supply: 12~48 V DC, redundant power supply with polarity reversal protection function
Extended operating temperature range, -40 °C ~ +80 °C
Removable terminal connection
Protection class: IP40
Power consumption: <5 watts
Number of ports: 8
Ethernet speed: Fast Ethernet
Industrial usage: yes
Installation type: DIN rail
Managed: no
Number of ports (Uplink): 1
Outdoorsuitable: no
PoE (Power over Ethernet): no
Protection against vanadlism: no
VLAN: no

Package content

Industrial 8-port Fast Ethernet switch
Quick start guide

Downloads and Certificates

Certificate

ext. Link

Datasheet

Manual

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	42	34,80	46,00	64,50	36,00	106.812,00
Packaging Unit Inside	1	0,83	15,40	21,30	6,70	2.197,73
Packaging Unit Single	1	0,83	15,40	21,30	6,70	2.197,73

Customs tariff number: 8517620000

Safety notes

This product is intended for indoor use only.
Read all instructions and follow all warnings and instructions on the device.
Do not place this appliance on an unstable surface (such as a trolley, stand, table, etc.).
Do not use this appliance near water.
Do not place this appliance near or above a radiator.
The housing is equipped with openings for heat dissipation and ventilation. To prevent overheating during operation, the ventilation openings must not be blocked or covered.
Do not place the appliance on a soft surface (e.g. bed, sofa, blanket, etc.). This will block the ventilation.
The appliance must not be installed in a closed environment if adequate ventilation is not guaranteed.
Do not spray any liquids onto the appliance.
Disconnect the mains plug before cleaning. Do not use any liquid or foam cleaners.
Clean the appliance with a damp cloth.
Connect the device according to the power supply on the rating plate.
To prevent damage to the appliance, it is important that all appliances are properly earthed.
Do not place any objects on the power cable and lay it in such a way as to avoid tripping hazards.
Use a surge protector, a regulator or an uninterruptible power supply (UPS) to protect your system from sudden, temporary and reduced power.
Secure the system cable and mains cable properly and ensure that no objects are pressing on the cable.
Do not insert any objects into the appliance through the openings in the housing. There is a risk of a short circuit, which can lead to fire or electric shock.
Do not attempt to repair the appliance yourself. Always contact an authorized customer service centre.
If any of the following conditions occur, unplug the appliance and send it to an authorized service centre for repair
The mains cable, power supply unit or plug for the power supply is damaged or worn;
Liquid has penetrated the appliance;
The device has been exposed to rain or water;
The device has been dropped or the housing has been damaged;
The function of the device has obviously changed;
The appliance cannot be operated as described in the operating instructions.