QSFP+ 40G 30 m AOC cable

DIGITUS QSFP+ 40G 30 m AOC cable

Product number: DN-81314
EAN: 4016032460169

QSFP+ 40G 30m AOC cable Allnet,CISCO,Dell,D-Link,Edimax,Etherwan,Fortinet,

High bandwidth without delays or signal loss

  • QSFP+ 40G 30 m AOC cable
  • 2.125-41.2 Gbps supported data rate
  • Compatible brands: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

Distribution Partner Overview

More product information

Description

Active DIGITUS® 40G QSFP+ AOC cables are a high-performance, energy-saving, short-range connectivity solution that supports InfiniBand QDR/DDR/SDR,12.5G/10G/8G/8G/4G/4G/2G fibre channels, PCIe and SAS. They are compliant with the QSFP MSA and IEEE P802.3ba. Four full-duplex channels are used, with each channel capable of transferring data at rates of up to 11.3 Gbps, thus ensuring an aggregated rate of 45.2 Gbps. Active DIGITUS® 40G QSFP+ AOC cables provide increased port density and cost savings in the overall system.

Technical details

  • 30 m maximum distance
  • 2.125-41.2 Gbps supported data rate
  • Supported applications: 12.5G fibre channel, 10G fibre channel, 8G fibre channel, 4G fibre channel and 2G fibre channel
  • Compatible brands: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
  • DDM/DOM support
  • Temperature range: 0 to +70 °C
  • Connectors: QSFP
  • Power: +3.3 V supply voltage
  • Power consumption: <1.5 W
  • 850 nm wavelength multimode fibre
  • Length: 30 m
  • DDM Support: no
  • Connection: QSFP+
  • Ethernet speed: 40 Gigabit

Package content

  • QSFP+ 40G 30 m AOC cable
  • Quick start guide

Downloads and Certificates

Datasheet

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 100 1,50 48,00 48,00 38,00 87.552,00
Packaging Unit Inside 1 0,02 26,00 26,00 2,00 1.352,00
Packaging Unit Single 1 0,02 26,00 26,00 2,00 1.352,00
Customs tariff number: 8517620000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
  • eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com