SFP28 25G 3m DAC Cable

DIGITUS SFP28 25G 3m DAC Cable

Product number: DN-81243
EAN: 4016032478805

DAC Cable SFP28 3 M DAC Cable 25 G 3m

The SFP28 25G cable is suitable for connections between two SFP28 ports in 25G network components

  • 3 m maximum distance
  • AWG 30 Twinax Cable
  • data rates of up to 25.88 Gbps supported
  • Hot-plug capable SFP 20 PIN connection
  • Temperature range: 0 to 70°C
  • Improved pluggable form factor (IPF)
  • Power: +3.3 V supply voltage
  • Compatible with the SFF-8432 specifications

Distribution Partner Overview

More product information

Description

25G SFP28 DAC Twinax cables are a powerful, energy-saving solution for 25G Ethernet applications, switches, high-performance computer, data acquisition systems and telecommunications systems. It consists of a shielded Twinax copper cable with pluggable connections on both ends. Passive DAC cables have no electrical components in the cable and are suitable for short transmission distances.

Technical details

  • Transmission channels: RX and TX
  • Connections: SFP28
  • data rates of up to 25.88 Gbps supported
  • Temperature range: 0 to 70°C
  • Storage temperature range: -40 to 85°C
  • Power: +3.3 V supply voltage
  • Power consumption: 0.5 W
  • Compatible with MSA SFP28
  • Electrical interface: 20-pole connector plug
  • Management interface: Serial, I²C
  • The connection is compatible with the SFF-8432 specification
  • Compatible with the following manufacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
  • DDM Support: no

Package content

  • SFP28 25G DAC Cable 3 m

Downloads and Certificates

Datasheet

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 100 15,00 48,00 48,00 38,00 87.552,00
Packaging Unit Inside 1 0,15 0,00 0,00 0,00 0
Packaging Unit Single 1 0,15 26,00 26,00 4,00 2.704,00
Customs tariff number: 8517620000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
  • eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com