DIGITUS Mini GBIC Copper SFP Module, 10 Gbps, RJ45

Product number: DN-81210

EAN: 4016032459620

SFP+ 10G Copper Transceiver, up to 100m supports 10G, 5G, 2.5G, 1G Base-T standard

10 Gigabit Ethernet over CAT 6A cable

Compatible with IEEE 802.3 standard and most common switch vendors
Hot-pluggable SFP footprint
Distance: Up to 100 m (1 Gbit)
High operating temperature: 0°C to 65°C
Easy plug-and-play installation

More product information

Distribution Partner Overview

Description

The DIGITUS® 10G Mini GBIC SFP transceiver modules offer the highest quality and reliability. The modules offer a perfect opportunity for you to extend your Gigabit network switch with an additional RJ45 connection. Thanks to the hot-plug capability, you can install the module without any interruption of the network traffic or restart of the device. In addition, conformity with the MSA (Multi Source Agreement) standard provides compatibility with the current network switch manufacturers. It is compatible with the 10GBase-T / 5GBase-T /2.5GBase-T / 1000Base-T standards as specified in IEEE 802.3.

Technical details

Data transfer rate: 10 Gigabit max. (IEEE802.3 compatible)
Compatible standards: 10GBase-T, 5GBase-T, 2.5GBase-T, 1000Base-T
Cable length: 1000Base-T: 100 m, 5 / 2.5GBase-T: 50 m, 10GBase-T: 30 m
MSA (Multi Source Agreement) compliant
Hot pluggable - installation possible while in operation
Auto MDI/MDI-X
Operating temperature: 0°C to 65°C
Storage temperature: -40°C to 85°C
Serial communication protocol: I²C clock rate: 200 Hz
Compatibel with the following manufacturers: Allied Telesis, Allnet, Avaya, CISCO, D-Link, Edimax, FINISAR, FORCE 10, Gigamon Intellinet, KTI Networks, Level One, PLANET, Tenda, TP-Link, TRENDnet, Mikrotik , ENTERASYS, RIVERSTONE , Unifi, Ubiquiti, ZyXE
Mode: Copper
Connector: RJ45
Distance (km): 0.1
DDM Support: no
Broadcasting Mode: Unidirectional
Manufacturer compatibility: Universal (MSA)
Ethernet speed: 10 Gigabit

Package content

1 x 10GBase-T Mini GBIC Copper SFP Module

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	20	0,80	41,00	26,00	16,00	17.056,00
Packaging Unit Inside	1	0,04	3,00	11,50	9,00	310,50
Packaging Unit Single	1	0,04	3,00	11,50	9,00	310,50

Customs tariff number: 8517620000

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage