DIGITUS SATA connection cable

Product number: AK-400104-005-R

EAN: 4016032299530

SATA connection cable, L-type F/F, 0.5m, 90ø l-angled - straight, SATAII/III, re

Less thermic jam in the PC

More product information

Distribution Partner Overview

Description

This internal data cable used to connect Serial-ATA Hard Drives as well as CD-/DVD/Blue-Ray Recorder to the Mainboard, for example. Because of the 90 ° left angled connector, the cable runs upward from the horizontally built-in hard drive. It's also downward compatible to SATA rev. II/I

Technical details

Compatible with Serial ATA standards
Data transfer rate up to 300MB/s
7-wired cable, UL21149
4 x Data wires, 3 x earthing wires
Male connector 90° angled
Assortment: SATA Cables
Color cable: red
Color connector: black
Connector 1: SATA (7pin) connector, 90° angled, L-type
Connector 2: SATA (7pin) connector, L-type
Data rate: 6 Gbit/s
Hoods: molded
Interlock: none
Style: Flat cable
Version: SATA Revision 3
Length: 0.5 m

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	300	6,10	46,00	32,00	25,00	36.800,00
Packaging Unit Inside	10	0,20	19,00	16,00	5,00	1.520,00
Packaging Unit Single	1	0,02	15,00	6,00	2,50	225,00

Customs tariff number: 8544429090

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.