DIGITUS DisplayPort Adapter / Converter

Product number: AK-340403-001-S

EAN: 4016032289289

DisplayPort Adapter Cable, Type DP - HD15 M/F, 0.15m,w/interlock, DP 1.2, bl

Use your existing VGA monitor with a DisplayPort device without loss of quality

Ideal for the connection of PCs or notebooks with a VGA monitor or projector
Cost savings for upgrading to a DP display
Supports monitor resolutions of up to 1920 x 1200p
Supports HDTV resolutions of up to 1080p / 60 Hz
Plug and Play, no additional driver and no power adapter necessary
Robust cable with strands made of copper, with foil and mesh shielding for a dependable connection
Double shielding for optimal image quality
Snap-on mounting for secure positioning of plug

More product information

Distribution Partner Overview

Description

This adapter / converter suits for example ideal to connect a notebook or computer with DP interface to a VGA monitor, beamer, LCD/TFT monitor with a VGA monitor cable.

Technical details

Supports up to 1080p with 60Hz
Supports monitor resolutions of up to 1920 x 1200p
Supported transmission modes: RBR, HBR, HBR2
Maximal bandwidth: 21,6 Gbps
HBR-Version/transfer mode: HBR2 (5,40 Gbit/s per lane)
HDCP-Version: HDCP 1.3
Assortment: DisplayPort Cables
AWG: 28
Color cable: black
Color connector: black
Connector 1: DP, plug
Connector 2: HD15, jack
Connector surface: nickel-plated
DisplayPort standard: DisplayPort 1.2
Ferrite filter: none
HDTV Standard: Ultra HD 4K
Hoods: molded
Interlock: Snap fastener
Packaging: Polybag
Wire material: CU
Length: 0.15 m
AOC - Active Optical Cable: no
Shielding: Double shielding

Downloads and Certificates

Certificate

ext. Link

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	200	8,00	38,10	30,20	31,10	35.784,28
Packaging Unit Inside	10	0,40	40,60	40,60	8,10	13.351,72
Packaging Unit Single	1	0,04	20,00	15,00	1,60	480,00

Customs tariff number: 8471500000

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.