DIGITUS HDMI Y-Splitter Cable

Product number: AK-330400-002-S

EAN: 4016032296119

HDMI Y-Splitter Cable, Type A -2x Type A M/F, 0.2m, passiv, Full HD, gold, bl

Full HD, Dual-Link

More product information

Distribution Partner Overview

Description

This passive Full HD (1080p) and 3D suitable cable is usefull to connect 2 TV's or monitors with the interface of a PC or notebook, for example. Simultaneous use of both devices is not possible.

Technical details

Support 1080p with 24Hz
HDMI type A plug <=> 2x HDMI type A jack
Molded housing
shielded
AWG30
UL20276
Gold plated
Color: Black
Assortment: HDMI Cables
AWG: 30
Color cable: black
Color connector: black
Connector 1: HDMI type A, plug
Connector 2: 2x HDMI type A/F
Connector surface: gold-plated
Ferrite filter: none
HDTV Resolution max.: 1920 x 1200 Pixel, 60Hz
HDTV Standard: Full HD
Hoods: molded
Packaging: Polybag
Wire material: CU
Length: 0.2 m
AOC - Active Optical Cable: no
Shielding: single shielding

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	70	8,70	35,00	26,00	24,00	21.840,00
Packaging Unit Inside	10	1,24	40,00	33,00	5,00	6.600,00
Packaging Unit Single	1	0,12	25,00	14,00	4,00	1.400,00

Customs tariff number: 8544429090

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.