CAT 6 S/FTP patch cord, 10 units

DIGITUS CAT 6 S/FTP patch cord, 10 units

Product number: DK-1644-0025-G-10
EAN: 4016032441335

CAT 6 S-FTP patch cord, Cu, LSZH AWG 27/7, length 0.25 m, 10 pieces, color green

Future-oriented standards and high-end quality for your network.

  • With LSZH (Low Smoke Zero Halogen) sheath for best fire behaviour and low smoke emissions.
  • Transparent red colored plug for easy identification of Category 6 (250 MHz)
  • Conductor: Copper (Cu)
  • PoE+ ready

More product information

Distribution Partner Overview

Description

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. DIGITUS® patch cords will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The patch cords have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6, because of the new red colored connector.

Technical details

  • 2x RJ45 (8P8C) connectors
  • Boots with kink protection, strain relief and latch protection
  • Length marking on boot
  • Conductor: Copper (Cu)
  • 10 pieces
  • Configuration: 1:1
  • Connector 1: Modular RJ45 (8/8) plug
  • Connector 2: Modular RJ45 (8/8) plug
  • Packaging: DIGITUS Polybag
  • Category: CAT 6
  • Shielding: S-FTP, pairs in metal foil and braid shielding
  • Length: 0.25 m
  • Color: green
  • Jacket: LSOH
  • Slim Version: no
  • Structure: 4 x 2 AWG 27/7, twisted pair
  • Flat Version: no

Downloads and Certificates

Datasheet

Certificate

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 25 4,90 36,00 36,00 24,00 31.104,00
Packaging Unit Inside 10 1,96 5,20 22,00 28,00 3.203,20
Packaging Unit Single 1 0,20 1,60 11,50 21,00 386,40
Customs tariff number: 8544421000

Safety notes

  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
  • Ensure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
  • Ensure that cables are not laid in areas where they can be easily damaged mechanically.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com