DIGITUS CAT 6 S/FTP patch cord

Product number: DK-1644-005/OR

EAN: 4016032328735

CAT 6 S-FTP patch cord, Cu, LSZH AWG 27/7, length 0.5 m, color orange

Future-oriented standards and high-end quality for your network.

With LSZH (Low Smoke Zero Halogen) sheath for best fire behaviour and low smoke emissions.
Transparent red colored plug with metal shielding for easy identification of Category 6 (250 MHz)
Conductor: Copper (Cu)
PoE+ ready

More product information

Distribution Partner Overview

Description

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. DIGITUS® patch cords will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The patch cords have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6, because of the new red colored connector.

Technical details

2x RJ45 (8P8C) connectors
Boots with kink protection, strain relief and latch protection
Length marking on boot
Conductor: Copper (Cu)
Configuration: 1:1
Connector 1: Modular RJ45 (8/8) plug
Connector 2: Modular RJ45 (8/8) plug
Packaging: DIGITUS Polybag
Category: CAT 6
Shielding: S-FTP, pairs in metal foil and braid shielding
Length: 0.5 m
Color: orange
Jacket: LSOH
Slim Version: no
Structure: 4 x 2 AWG 27/7, twisted pair
Flat Version: no

Downloads and Certificates

Datasheet

Certificate

TypeAppr. GHMT EN DE

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	180	5,70	36,00	36,00	22,00	28.512,00
Packaging Unit Inside	10	0,32	5,20	22,00	28,00	3.203,20
Packaging Unit Single	1	0,03	1,60	11,50	21,00	386,40

Customs tariff number: 8544421000

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Ensure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.