DIGITUS Cable tester, network, RJ45, Single side Tester

Product number: DN-14001-2
EAN: 4016032498346

Cable tester, network, RJ45, Single side tester main device, remote unit, PoE tester, with case

Future-oriented standards and high-end quality for your network.

  • Compatibility: supports CAT 5, CAT 5e, CAT 6, and CAT 6A cables
  • Modularity: main unit and remote module allow easy testing over long cable runs
  • POE: PoE test to determine voltage and power on PoE-enabled ports (IEEE 802.3af/at)
  • Protection: shock and splash protection thanks to robust housing.
  • User-friendliness: Simple operation with clearly understandable display and signal tone in the event of errors.
  • User-friendliness: Color-coded LEDs or graphical display for test results

More product information

Description

Intelligent, fast and intelligent state tester for connection of telephone and network harness. Check the connection between RJ45 connector and wire-harness. Accurately determine which end of the RJ45 connector is connecting with the network line. It perfectly solves the problem that the ordinary tester cannot determine two water. In the end, the RJ45 connector is not connected at that end, so as to save time.

Technical details

  • Test voltage: low voltage operation, safe for network devices and users
  • Measurement accuracy:
  • High precision in fault diagnosis (±1%)
  • Identification of signal loss and cable breaks
  • Shielding test: Detects and checks cable shielding (STP/FTP)
  • Cable test: test for continuity, short circuit, crossing and pairing
  • Signal check: Can send a signal tone to identify cable runs in larger networks
  • Power supply: Low power consumption, typically ≤ 0.5 W in operation

Downloads and Certificates

Datasheet

Logistics

  Number
(pcs)
Weight
(kg)
Depth
(cm)
Width
(cm)
Height
(cm)
cm³
Packaging Unit Carton 40 12,00 52,00 40,00 27,00 56.160,00
Packaging Unit Inside 1 0,30 19,00 12,00 5,00 1.140,00
Packaging Unit Single 1 0,30 19,00 12,00 5,00 1.140,00
Customs tariff number: 9031808000

Safety notes

  • Avoid using network test devices in damp or wet environments, as this can lead to short circuits or electric shocks.
  • Only use the device in the specified operating temperature ranges and avoid extreme humidity.
  • Never connect the tester to unauthorized sources or excessively high voltages. Overloading can damage the device or lead to dangerous situations.
  • Check the respective tools for obvious defects before each use.
  • Remove damaged hand tools from use immediately and repair them professionally or replace them if necessary.
  • Clean tools after use.
  • Store safely and clearly.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com