DIGITUS Fiber Optic Splice Box, Equipped, LC, OM3

Product number: DN-96330/3

EAN: 4016032278412

FO splice box, 1U, equipped, 6x LC DX, OM3 incl. splice cassette, colored pigtails, couplers

FO splice box, 1U, equipped, 6x LC DX, OM3,incl. splice cassette, colored pigtails, couplers

Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s), crimp splice holders
Colored pigtails
Couplers with zirconia ceramic ferrule
Couplers in polymer housing
Carrier housing made of 1.0 mm steel sheet, varnished
1 height unit (44.45 mm)
483mm width (19")
240mm depth
M20/M25 screw, cassette, cassette cover and strain relief included
Sliding
Assembly: Splice Box
Color: light grey, RAL 7035
Connector type: LC / UPC / duplex
Fiber class: OM3
Number of fibers: 12
Type: sliding

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	5	15,30	53,50	33,00	29,00	51.199,50
Packaging Unit Inside	1	3,06	51,50	31,50	5,50	8.922,38
Packaging Unit Single	1	3,06	51,50	31,50	5,50	8.922,38

Customs tariff number: 8471800000

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.