Fiber Optic Splice Box, Equipped, LC, OM3

DIGITUS Fiber Optic Splice Box, Equipped, LC, OM3

Product number: DN-96332/3
EAN: 4016032278474

FO splice box, 1U, equipped, 24x LC DX, OM3 incl. splice cassette, colored pigtails, couplers

More product information

Distribution Partner Overview

Description

FO splice box, 1U, equipped, 24x LC DX, OM3,incl. splice cassette, colored pigtails, couplers

Technical details

  • Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s)
  • Colored pigtails
  • Couplers with zirconia ceramic ferrule
  • Couplers in polymer housing
  • Carrier housing made of 1.0 mm steel sheet, varnished
  • 1 height unit (44.45 mm)
  • 483mm width (19")
  • 240mm depth
  • M20/M25 screw, cassette, cassette cover and strain relief included
  • Sliding
  • Assembly: Splice Box
  • Color: light grey, RAL 7035
  • Connector type: LC / UPC / duplex
  • Fiber class: OM3
  • Number of fibers: 48
  • Type: sliding

Downloads and Certificates

Datasheet

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 4 14,00 53,00 35,00 25,00 46.375,00
Packaging Unit Inside 1 3,50 51,50 32,00 5,50 9.064,00
Packaging Unit Single 1 3,50 51,50 32,00 5,50 9.064,00
Customs tariff number: 8471800000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com