DIGITUS Fiber Optic Splice Box, Equipped, SC, OS2

Product number: DN-96320/9

EAN: 4016032278337

FO splice box, 1U, equipped, 6x SC DX, OS2 incl. splice cassette, colored pigtails, couplers

Splice boxes are installed permanently in the network cabinet to bundle the fiber optic cables that converge there - comparable to a patch panel for
In the network cabinet, the signal from the fiber optic cable can be connected to switches, media converters, routers, modems, servers, SFP modules or FTTH / FTTB via patch cables.
The fiber pigtails used are colour-coded in accordance with DIN IEC 60304 and inserted into the splice cassette(s).
The housing material used is 1 mm thick sheet steel, which is painted or powder-coated in the color grey (RAL 7035).
The splice box is already prefabricated - an assembled splice cassette and corresponding couplings for the front panel are already installed.

FO splice box, 1U, equipped, 6x SC DX, OS2,incl. splice cassette, colored pigtails, couplers

Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s), crimp splice holders
Colored pigtails
Couplers with ceramic sleeve
Couplers in polymer housing
Carrier housing made of 1.0 mm steel sheet, varnished
1 height unit (44.45 mm)
483mm width (19")
280mm depth
M20/M25 screw, cassette, cassette cover and strain relief included
Sliding
Assembly: Splice Box
Color: light grey, RAL 7035
Connector type: SC / UPC / duplex
Fiber class: OS2
Number of fibers: 12
Type: sliding

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	5	12,50	51,50	31,50	5,50	8.922,38
Packaging Unit Inside	1	2,50	51,50	31,50	5,50	8.922,38
Packaging Unit Single	1	2,50	51,50	31,50	5,50	8.922,38

Customs tariff number: 8471800000

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com