DIGITUS Fiber Optic Unibox for wall mounting, small

Product number: DN-96800S-2

EAN: 4016032466093

FO wall mounting Unibox Small 265 x 150 x 55 mm, grey (RAL 7035)

Compact splice box for wall mounting

For up to 24 fibers
Cable input or output on the top and bottom side with foam rubber strips
Lockable (incl. 2x keys)
Sturdy cold-rolled sheet steel
Integrated mounting fixtures for cable ties
Various adapter plates available for couplings
Mounting material included (4x dowels, screws, washers, cable ties)

More product information

Distribution Partner Overview

Description

The fiber optic Unibox is a sturdy and compact splice box for wall mounting. With separately available coupling brackets that can be mounted in seconds, the box can be equipped with couplings, fiber pigtails and cables depending on specific needs. Areas of application include Indoor telecommunications and data communication applications.

Technical details

Protection class IP20
Coloring with powder coating in gray (RAL 7035)
Product dimensions (H x W x D): 265 x 150 x 55 mm
Weight: 1.3 kg (net); 1.4 kg (gross)

Package content

1x Unibox
2x keys
Mounting material (screws, dowels, washers, cable ties)

Downloads and Certificates

Datasheet

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	0,60	32,00	19,50	6,50	4.056,00
Packaging Unit Inside	1	0,60	32,00	19,50	6,50	4.056,00
Packaging Unit Single	1	0,60	31,00	19,00	6,00	3.534,00

Customs tariff number: 8302490099

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.