DIGITUS FTTH Micro Splice Box for 12 (24) x Splice Connections with Splice Cassette

Product number: DN-931092

EAN: 4016032466222

Micro Fiber Enclosure, 12x Fibers, splice tray incl. Splice holder for crimp splice protection

Micro splice box suitable for holding up to 24 splice connections include splice cassette & splice holder

Suitable for up to 24 splice connections
Suitable for wall mounting
Including two splice holders for 12 splice connections each

More product information

Distribution Partner Overview

Description

The micro splice box from DIGITUS® is primarily designed for FTTH (fiber to the home) applications and can hold up to 12 splice connections. The fibers are fastened by the splice holder in the splice cassette included with delivery, so they are protected in the housing. The housing consists of a base plate, splice cassette and cover and is designed for wall mounting. Cable entry grommets, two cable brackets with adhesive surfaces and cable ties to fix the cables in place are also included in delivery.

Technical details

Suitable for up to 24 splice connections
Including two splice holders for 12 splice connections each
Suitable for wall mounting
Cable entry points 2 x each side or on the back side optional
Including mounting material, cable feedthrough grommets & splice holder
Dimensions: 160 x 110 x 30 mm (L x W x H)
Weight: 170 g (base plate, splice tray, cover)
Color: RAL 7035 (light gray)

Package content

1 x FTTH Micro Splice Distributor for 4 x SC / Simplex, 4 x LC / Duplex
2 x splice holder
2 x cable entry grommets
4 x cable ties
Installation instruction

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	50	15,00	38,00	52,00	40,00	79.040,00
Packaging Unit Inside	1	0,30	0,00	0,00	0,00	0
Packaging Unit Single	1	0,30	16,00	17,50	4,00	1.120,00

Customs tariff number: 9033009000

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product specifications for the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.