DIGITUS FTTH Micro Splice Distributor for 2 x SC SX / 2 x LC DX

Product number: DN-931091

EAN: 4016032466215

Micro Fiber Optic Distribution Box 4x fibers, w/o adapters for 2x SC SX, 2x LC DX

Micro Splice Distributor for 2 x SC Simplex, 2 x LC Duplex Plug Connections

Suitable for splice or plug connections
For 2 x SC Simplex plug connections
For 2 x LC Duplex plug connections
Suitable for wall mounting

More product information

Distribution Partner Overview

Description

Keep things neat and tidy! The micro splice distributor from DIGITUS® is primarily designed for FTTH (fiber to the home) applications and can hold either 2 x SC Simplex or 2 x LC Duplex plug connections. In addition, a splice holder is included that allows you to install up to 4 splice connections securely in the housing. The housing consists of a base plate, center plate and cover and is designed for wall mounting. Four cable entry grommets, two cable brackets with adhesive surfaces and cable ties to fix the cables in place are also included in delivery.

Technical details

Suitable for 2 x SC Simplex or 2 x LC Duplex connectors / couplings
Cable entry points 2 x each side or on the back side optional
Including mounting material, cable feedthrough grommets & splice holder
Dimensions: 160 x 110 x 30 mm (L x W x H)
Weight: 179 g (base plate, center plate, cover)
Color: RAL 7035 (light gray)

Package content

1 x FTTH Micro Splice Distributor for 2 x SC / Simplex, 2 x LC / Duplex
4 x cable entry grommets
4 x cable ties
2 x cable brackets with adhesive pad
Installation instruction

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	50	15,00	38,00	52,00	40,00	79.040,00
Packaging Unit Inside	1	0,30	0,00	0,00	0,00	0
Packaging Unit Single	1	0,30	16,00	17,50	4,00	1.120,00

Customs tariff number: 9033009000

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product specifications for the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.