Fiber Optic Multimode Patch Cord, OM 3, ST / ST

DIGITUS Fiber Optic Multimode Patch Cord, OM 3, ST / ST

Product number: DK-2511-01/3
EAN: 4016032248279

FO patch cord, duplex, ST to ST MM OM3 50/125 µ, 1m

Future-oriented standards and high-end quality for your network.

More product information

Distribution Partner Overview

Description

FO patch cord, duplex, ST to ST,MM OM3 50/125 µ, 1m

Technical details

  • Duplex cable
  • LSOH
  • Connector with ceramic ferrule
  • Cable diameter 2 mm
  • Single packed with test-report
  • Assortment: Fiber Optic Patch Cables
  • Boot: two-color
  • Cable diameter: 2 mm
  • Cable type: I-VH 2G50/125µ
  • Color cable: aqua
  • Connector 1: ST
  • Connector 2: ST
  • Fiber class: OM3
  • Fiber diameter: 50/125µ
  • Mode: Multimode
  • Packaging: DIGITUS Polybag
  • Length: 1 m

Downloads and Certificates

Datasheet

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 200 10,20 41,00 41,00 28,00 47.068,00
Packaging Unit Inside 25 1,28 19,00 19,00 12,00 4.332,00
Packaging Unit Single 1 0,05 17,00 17,00 1,00 289,00
Customs tariff number: 8544700000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com