DIGITUS Fiber Optic Multimode Patch Cord, LC / LC

Product number: DK-2533-10-5

EAN: 4016032424567

FO patch cord, duplex, LC to LC MM OM5 50/125 µ, 10 m

Future-oriented standards and high-end quality for your network.

FO patch cord, duplex, LC to LC,MM OM5 50/125 µ, 10 m

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	40	3,50	41,00	41,00	28,00	47.068,00
Packaging Unit Inside	5	0,44	19,00	19,00	12,00	4.332,00
Packaging Unit Single	1	0,09	17,00	17,00	2,40	693,60

Customs tariff number: 8544700000

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.