DIGITUS LC/APC Fiber Optic Fast connector (10 Pieces)

Product number: DN-FC-9101-APC

EAN: 4016032494638

Fiber Optic Fast Connector, SM LC/APC 10 piece pack

Fast connectors are designed to enable quick and easy termination of fibers in the field. For uncomplicated fast repair of existing installations as well as for new installations, e.g. for Fttx in-house cabling.

Quick and easy to install
Low attenuation values
Applicable for all common singlemode fibers
For fiber cladding with 0.9mm thickness
LC/APC ceramic ferrule with 2.50mm thickness
Robust strain relief
Durable index matching gel
No complex splicing equipment necessary
Low tooling requirements
Low tool effort

More product information

Distribution Partner Overview

Description

The LC/APC fast connectors are used to close optical cables and fast cross-connection, cable repair, various switching nodes in FTTH networks to form a continuous optical patch. They completely eliminate the need for hand polishing in the field. The mechanical splice technology ensures precise fiber alignment and offers an immediate low loss termination for single-mode optical fibers. The attenuation obtained does not exceed 0.3 dB. The connectors can be used in all optical networks where UPC type connector is required. It is suitable for optical cabling in primary/secondary/tertiary cabling and for use in FTTx networks.

Technical details

Connector Type : LC
Polishing : APC
Fiber Mode : 9/125μm Singlemode
Ferrule : Ceramic (1,25mm)
Insertion Loss ≤0.2dB
Return Loss ≥50dB
Cable Diameters : 0.9/2.0/3.0mm
Product colour : Green
Storage Temperature : -40 to 85°C
Operating Temperature : -20 to 75°C
Dimension : 45mm long

Package content

10 x LC/APC Fiber Optic Connector

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	100	4,20	43,00	32,50	28,00	39.130,00
Packaging Unit Inside	1	0,04	0,00	0,00	0,00	0
Packaging Unit Single	1	0,04	15,00	10,00	6,90	1.035,00

Customs tariff number: 8536700010

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com

Customers who bought this product also bought

19" Splice Enclosures - Equipped

Couplers