DIGITUS Pre-assembled Fiberglass Universal Breakout Cable, Multi Mode OM4, 8 Fibers, LC/UPC - LC/UPC

Product number: DK-24338U075BK-BBB
EAN: 4016032485155

Breakout cable 8 Fibers, OM4, LC/UPC-LC/UPC universal, color black, 75m

Pre-assembled fiberglass breakout cables enable easy, time-saving and flexible installation of network routes with a high bandwidth.

  • Pre-assembled
  • High-quality plugs, factory-mounted
  • Ready for immediate use without additional splicing work
  • Standard lengths available from the warehouse
  • High-quality components and construction
  • Applications can be used indoors and outdoors
  • Connection of network cabinets without potential differences
  • Individual mechanically protected fibers
  • Robust cable construction
  • Two-sided insertion tool for secure installation

More product information

Description

This pre-assembled breakout fiberglass cable is perfect for installations that require an extremely robust and reliable fiberglass design where maximum mechanical protection is necessary. It offers a secure Plug & Play solution for installations with the pre-assembled plug. Easy installation on partially equipped patch panels, for example. The measurement report included in delivery eliminates the need for laborious follow-up inspection.

Technical details

  • Cable type: Breakout / Universal cable (I/A-DQ (ZN) BH X G 50/125µm)
  • Fiber category: Multi mode
  • Fiber type: OM4 50/125
  • Number of strands: 8
  • Length: 75
  • Plug connection 1: LC/UPC
  • Plug connection 2: LC/UPC
  • Sheath material: Dca
  • Color of outer sheath: Black
  • Halogen-free (in accordance with EN 50267-2-3): Yes
  • IL in multi mode: max. 0.3 dB
  • IL in single mode: max. 0.3 dB
  • RL in multi mode: min. 30 dB
  • RL in single mode: min. 50 dB
  • Operating temperature: -20 to 70℃
  • Storage temperature: -20 to 70℃
  • Two-sided insertion tool for secure installation
  • Application: universal
  • Boot: single-color
  • Cable jacket: LSOH
  • Cable type: U-DQ (ZN) BH X G 50/125µm
  • Color cable: black
  • Connector 1: LC
  • Connector 2: LC
  • Fiber class: OM4
  • Fiber diameter: 50/125µ
  • Mode: Multimode
  • Number of connectors side 1: 1
  • Number of connectors side 2: 1
  • Number of fibers: 8
  • Polishing: UPC
  • Length: 75 m

Downloads and Certificates

Datasheet

Logistics

  Number
(pcs)
Weight
(kg)
Depth
(cm)
Width
(cm)
Height
(cm)
cm³
Packaging Unit Carton 1 6,40 35,00 35,00 25,00 30.625,00
Packaging Unit Inside 1 6,42 0,00 0,00 0,00 0
Packaging Unit Single 1 6,42 35,00 35,00 25,00 30.625,00
Customs tariff number: 8544700000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com