DIGITUS Network cabinet Unique series - 800x800 mm (WxD)

Product number: DN-19 26U-8/8-B-1

EAN: 4016032377986

26U network rack, Unique 1342x800x800 mm, color black (RAL 9005)

The DIGITUS® Unique series has been manufactured, designed and developed for the high demands of IT infrastructure.

Roof is prepared to accommodate a fan unit and an attached, removable cover
Locking system with swivel lever handle on front door (prepared to accept profile half cylinder; adapter included)
Slide-on cable inlet with foam rubber seal in the base

More product information

Distribution Partner Overview

Product comparison table ›

‹

›

Description

The network cabinets in the Unique series have been developed for particularly convenient and flexible network cabling. Brush-equipped inlets in the top and base (from 26U and 800 mm cabinet width), a slide-on inlet in the base chassis with foam rubber seal and rear brush strips above and below the rear door (from 26U) enable versatile use in a wide range of application scenarios. Vertical cable ducts with cover, installed next to the profile rails (from 800 mm enclosure width), round off the design. An offset, removable cover with ventilation slots ensures improved air circulation. This sits over a special construction for easy mounting of a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the enclosure. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

Technical details

Protection class IP20
Front door made entirely of metal frame with safety glass
Locking system with swivel lever handle on front door (prepared to accept profile half cylinder; adapter included)
120° door opening angle of the front and rear doors
Double-leaf rear door
1-point locking on all doors
Side panels are lockable and removable
Incl. 4 levelling feet, enclosed
483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized
483 mm (19") profile rails are adjustable in depth and marked with the height unit
Built-in depth struts provide stability
Slide-on cable inlet with foam rubber seal in the base
Cable inlet with brush strip at the top and bottom rear of the enclosure
Cable inlet in the floor and roof with brush strip on the left and right
Roof is prepared to accommodate a fan unit and an attached, removable cover
Various earthing points in the enclosure for built-in components
Incl. installation set (screws, cage nuts, washers)
Supplied fully assembled
Installation depth for components min.-max.: 563-743 mm
Front vertical cable routing panel
Cabinet type: Network cabinet
Color: black, RAL 9005
Depth: 800 mm
Front door: Glass door, single opening
Load capacity: 800 kg
Rear door: Steel door and cable entry, double opening
Side panels: Both sides
Units: 26
Width: 800 mm
IP protection class: IP20
Mounted: yes

Package content

Earthing cable set
Installation set (screws, cage nuts, washers)
Installation kit for profile half cylinder
2 x key

Downloads and Certificates

Datasheet

Manual

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	82,00	85,00	85,00	139,20	1.005.720,00
Packaging Unit Inside	1	82,00	85,00	85,00	139,20	1.005.720,00
Packaging Unit Single	1	82,00	85,00	85,00	139,20	1.005.720,00

Customs tariff number: 9403208000

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be neatly routed and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.