DIGITUS aluminum outlet strip with pre-fuse, 8 safety outlets, 2 m supply IEC C14 plug

Product number: DN-95410-R

EAN: 4016032369721

1U Aluminum PDU, rackmountable, 8x red CEE 7/7 10A Plug, 250VAC 50/60Hz, outlet

Safe and professional power in the 482.6 mm (19") range

Perfect power source for your 482.6 mm (19") enclosure
Outlets are turned by 35° which ensures space management and easy access

More product information

Distribution Partner Overview

Description

The DIGITUS® power distribution units are the perfect solution for you 482.6 mm (19") network- or server cabinet. Optimized for rack installation with 220-240V 50-60 Hz the DIGITUS® PDU offer you the best performance with qualified efficiency. The 482.6 mm (19") fixing material provides an optimized enclosing on the profile rails of your cabinets. Every PDU can be mounted horizontally as well as vertically and has the possibility, according to the cabinet, to be mounted faced up or down.

Technical details

8x RED Socket outlets 250VAC 50/60Hz / 10A / 2500W
Aluminum profile
35° turned outlets
2 metal fixings included
Cable: 2 m H05VV-F 3G1,5 mm²
IEC C14, plug
Pre-fuse
35° turned safety outlets
Current: 10 A
Input Plug: IEC 60320 C14 inlet
Installation: Desktop, Rack 0U, Rack 1U
Outlets: CEE 7/3
Phase: 1ph
Power: 2,3 kVA
Volts: 230 V
Inch form factor (IEC 60297): 482.6 mm (19")

Downloads and Certificates

Certificate

ext. Link

Datasheet

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	10	9,60	53,00	28,50	25,00	37.762,50
Packaging Unit Inside	1	0,96	50,10	11,00	5,00	2.755,50
Packaging Unit Single	1	0,96	50,10	11,00	5,00	2.755,50

Customs tariff number: 8544429090

Safety notes

This product is not intended for unsupervised use by children or persons under their care!
Prevent higher humidity or temperatures than those specified in the data sheet - Avoid moisture, dust or vapors, solvents, flammable gases.
Multiple sockets are not designed for permanent use with heavy loads!
Multiple sockets must not be cascaded (avoid stringing together several multiple sockets).
The maximum connected load must not be exceeded.
Defective multiple sockets must be taken out of service immediately and disposed of in an environmentally friendly manner.
In the event of a fault, take the product out of operation and contact a qualified electrician.
Do not open the product.
Disconnect the product from the power supply before cleaning. Do not use any aggressive or abrasive cleaning agents for cleaning.
The ingress of liquids can lead to a short circuit.