UPS External Battery Pack for 6kVA and 10kVA UPS Models (Extended Pack)

DIGITUS UPS External Battery Pack for 6kVA and 10kVA UPS Models (Extended Pack)

Product number: DN-170108
EAN: 4016032473596

Battery module with internal battery (20pcs)

A solution that increases the operating capacity of intelligent USV systems to protect IT devices with medium to high loads

  • Rack / tower with convertible design
  • Hot swappable – Batteries can be exchanged during operation
  • Supports rapid extension of backup time in case of increased need for capacity
  • Easy installation – Batteries can be exchanged by the user
  • Supports cold start function

More product information

Distribution Partner Overview

Description

The DIGITUS® USV Battery Modules ensure that UPS systems used in highly demanding environments can continue to reliably supply connected devices with power in case of interruptions to the power supply. A maximum of 4 battery modules can be connected in order to increase the operating time of the connected IT devices. The systems are protected by ensuring uninterrupted power supply while changing the batteries. The external battery backs can ensure a rapid increase for the bridging period in case of increasing need.

Technical details

  • The battery module can be installed in a 19” rack or as a separate tower with stand
  • Hot swappable – Batteries can be exchanged during operation
  • Compatible with OnLine USVs: DN-170106 & DN-170107
  • Battery voltage: ±120 VDC
  • Capacity (standard unit): 12 V / 9 Ah
  • Number of installed rechargeable batteries: 20 units
  • Batteries in a row: 10 (per battery module)
  • Battery type: Lead battery
  • Typical charging time: 6 - 8 hours to recover 90% of full capacity
  • Operating temperature: 20 °C to +25 °C
  • Humidity during operation: 0 - 90%
  • Terminal connections on the back
  • Dimensions (L×W×D): 131 x 443 mm x 680 mm
  • Net weight: 65 kg
  • Gross weight: 66 kg
  • Installation: Rack
  • Power: 6000VA – 10000VA
  • Technology: Online double conversion
  • Inch form factor (IEC 60297): 482.6 mm (19")

Package content

  • 1 x External USV Battery Pack for 6 kVA and 10 kVA USV models (extension module)
  • 1 x User manual
  • 1 x Connector cable (to connect UPS and battery module), 1.5m

Downloads and Certificates

Certificate

Datasheet

CE documents

Manual

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 1 68,20 77,20 56,50 26,50 115.587,70
Packaging Unit Inside 1 68,20 0,00 0,00 0,00 0
Packaging Unit Single 1 68,20 73,00 58,50 28,00 119.574,00
Customs tariff number: 8504408590

Safety notes

  • The UPS system must be absolutely dry before it is installed. Please allow the UPS system to acclimatize for at least two hours to adapt to the environment.
  • Protect the UPS system from water or moisture.
  • Avoid direct sunlight or installation near heat sources.
  • Do not block any ventilation openings in the housing.
  • Do not connect any devices or appliances that would overload the system.
  • Lay cables so that nobody can step on them or trip over them.
  • Do not connect any household appliances to the output sockets of the UPS system.
  • Only connect the UPS system to an earthed and easily accessible socket.
  • Only use VDE-tested, CE-marked mains connection cables at the input and outputs.
  • Never disconnect the mains connection cable during operation as this would cancel the protective earthing of the UPS system and all connected loads.
  • The UPS system has its own internal power source. The output sockets or output terminals of the UPS system can be energized even if the UPS system is not connected to the building cabling.
  • To switch off the UPS system completely, first press the OFF/Enter button to disconnect the mains.
  • Caution - Risk of electric shock. Even after disconnecting the device from the mains, the components inside the UPS system are still connected to the battery. There is a risk of electric shock.
  • Only persons who are sufficiently familiar with batteries and the necessary safety precautions may replace batteries and monitor operation.
  • Caution - Risk of electric shock. The battery circuit is not isolated from the input voltage. Dangerous voltages can occur between the battery terminals and the ground. Ensure that no voltage is present before touching!
  • When replacing the batteries, install the same number and type of batteries.
  • Do not open or destroy batteries. Leaking electrolyte can injure the skin and eyes and may be toxic.
  • The appliance may only be opened and repaired by a trained specialist.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com

Customers who bought this product also bought

UPS Accessories
UPS mounting kit for 19" network/ server cabinets (profile rail)
UPS mounting kit for 19" network/ server cabinets (profile rail)
Rail kit for 1K~10K UPS (2U or 3U) with package
Item No.: DN-170109
SNMP & WEB Card for DIGITUS® OnLine UPS Units
SNMP & WEB Card for DIGITUS® OnLine UPS Units
SNMP card V2.0,for DIGITUS OnLine UPS rack mounts DN-170xxx
Item No.: DN-170100-1
Server and Network
OnLine UPS system, 6 kVA/ 6 kW
OnLine UPS system, 6 kVA/ 6 kW
OnLine UPS Module, 6000VA/6000W 2U
Item No.: DN-170106
Basic
aluminum outlet strip with pre-fuse, 8 safety outlets, 2 m supply IEC C14 plug
aluminum outlet strip with pre-fuse, 8 safety outlets, 2 m supply IEC C14 plug
1U Aluminum PDU, rackmountable, 8x red CEE 7/7 10A Plug, 250VAC 50/60Hz, outlet
Item No.: DN-95410-R