DIGITUS Wall Mounting Cabinet Unique Series - 600x600 mm (WxD)

Product number: DN-19 07U-6/6-SW

EAN: 4016032257622

7U wall mounting cabinet, Unique 420x600x600 mm, color black (RAL 9005)

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany

Robust steel construction for sturdy wall mounting
Lockable safety-glass door with steel frame
Side panels are lockable and removable

More product information

Distribution Partner Overview

Description

The network cabinets for wall installation from the Unique series were developed for especially convenient and flexible network cabling. There is a sliding cable inlet with foam rubber seal in the roof of each cabinet. The back wall and floor plate are equipped with pre-cut cable inlets with a plastic cover. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pair of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable and lockable side walls in a modular design as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The housing frame plate is bolted on the wall and then connected with the housing. With optionally available levelling feet or casters, the wall housings from the Unique series can also be used as a free-standing unit.

Technical details

Safety class rating IP20
Lockable safety-glass door with steel frame
210° door opening angle
1-point-locking-mechanism on the front door
Side panels are lockable and removable
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
Max. installation depth: 450 mm
Cable entry on the rear side and base with plastic cover and top with sliding cover
Roof is prepared for fan units (punched out entries)
Ventilation slots for active and passive ventilation and exhausting
Several earthing points for rack components
Incl. installation set (screws, cage nuts, washers)
Rack is completely mounted
Equipment mounting depth min.-max.: 320-450 mm
Cabinet type: Wall mounting cabinet
Color: black, RAL 9005
Depth: 600 mm
Front door: Glass door, single opening
Load capacity: 100 kg
Side panels: Both sides
Units: 7
Width: 600 mm
IP protection class: IP20
Mounted: yes

Package content

Earthing wire set
Installation set (screws, cage nuts, washers)
2 x Keys

Downloads and Certificates

Datasheet

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	21,40	64,00	67,00	43,00	184.384,00
Packaging Unit Inside	1	21,40	64,00	67,00	43,00	184.384,00
Packaging Unit Single	1	21,40	64,00	67,00	43,00	184.384,00

Customs tariff number: 9403208000

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.