DIGITUS Wall Mounting Cabinets IP55 - Outdoor - 600x600 mm (BxT)

Product number: DN-19 09U-6/6-I-OD

EAN: 4016032362142

9U wall mounting cabinet, outdoor, IP55 579x600x600 mm, color grey (RAL 7035)

The DIGITUS® IP55 Outdoor Wall Mounting Cabinets are designed for industrial applications with protection against water and dust acc. to safety class IP55.

Protected against dust and water jets (IP 55)
Steel front door with lockable pivot lever and 3-point-locking mechanism
Front door with earthing lead and two welded, strengthening bars in U-shape as well as gasketting system
Free standing usage with additional plinth possible

More product information

Distribution Partner Overview

Description

The industrial network cabinets for wall installation are specially adapted according to protection type IP55 for the requirements of harsh environments, particularly outdoors. The wall housings offer optimal performance in part thanks to the 3-point locking system with lockable swing handle and insulated PG cable glands. Integrated fan filter housing ensures fresh air supply (protection against penetration of water and dust pursuant to IP54). Applications including outdoor areas that are subject to environmental effects (rain, dust, hail, snow, spraying water). To accommodate a fan module, the roof structure is also equipped with a filtered area. One pair of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard color gray (RAL 7035). Wall installation is carried out using the enclosed mounting bracket. Optionally, the cabinets can be used with a plinth as a free-standing solution or fastened to poles using the fastening set.

Technical details

Safety class rating IP 55
Lockable steel front door with pivot lever
140° door opening angle
3-point-locking-mechanism on the front door
Front door with earthing lead and two welded, strengthening bars in U-shape as well as gasketting system
483 mm (19“) profile rails mounted on the front side inside of the cabinet, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
1.5 mm strong sheet steel with a high loading capacity, powder coated
Single welded housing for more strength
Cable entries in base: 2x M32, 1x M63, 2x PVC blind cap (with diameter of 28 mm)
Roof canopy offers protection for suitable fan units and takes care of deaeration and hot air
Integrated air ventilation inlets ensure the entry of fresh air
incl. 4 pcs. mounting brackets, 3 mm strong, as well as suitable screws and washers, for wall mounting
Equipment mounting depth min.-max.: 142-500 mm
Distance of installation holes to wall mount (H x W) in mm: 387 x 550
Cabinet type: Wall mounting cabinet, outdoor
Color: light grey, RAL 7035
Depth: 600 mm
Front door: Steel door, closed, single opening
Load capacity: 100 kg
Units: 9
Width: 600 mm
IP protection class: IP55
Mounted: yes

Package content

Earthing wire set
Installation set (screws, cage nuts, washers)
2 x Keys

Downloads and Certificates

Datasheet

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	41,00	65,00	65,00	62,90	265.752,50
Packaging Unit Inside	1	41,00	65,00	65,00	62,90	265.752,50
Packaging Unit Single	1	41,00	65,00	65,00	62,90	265.752,50

Customs tariff number: 9403208000

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.